Construction complete · Aug 2023🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Wingstop

630 N Galloway Ave., Mesquite, TX 75149, Mesquite, TX, 75149

Wingstop is a renovation/alteration project at 630 N Galloway Ave., Mesquite, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2023). The project has an estimated value of $175K across about 1,214 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2023017560

$175K

Project Value

1,214

Square Feet

$144/sqft

Cost/SqFt

2 months

Duration

Registered:Apr 26, 2023

Start:Jun 1, 2023

Target:Aug 1, 2023

🏁

Project Closed

Project has been completed and closed

Wingstop is a Renovation/Alteration project located at 630 N Galloway Ave., Mesquite, TX 75149 in Mesquite, Texas. The project has an estimated value of $175K covering 1,214 sq ft. Cary Albert is the property owner and Wilkus Architects is the design firm of record. The project was registered with TDLR on April 26, 2023.

❓Frequently Asked Questions

What is Wingstop?

Wingstop is a renovation/alteration project at 630 N Galloway Ave. in Mesquite, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant finish out of an existing shell building. Work includes new walls, finishes, restrooms, mechanical equipment, and plumbing/electrical rough-ins for new equipment. There will be no exterior work.

Is Wingstop open in Mesquite?

Construction on Wingstop is complete — TDLR records show the project passed its required accessibility inspection in Aug 2023. The building is finished and very likely open.

Where is Wingstop located?

Wingstop is located at 630 N Galloway Ave., Mesquite, TX, 75149, in Dallas County.

Who is the owner or developer of Wingstop?

Cary Albert is the property owner/developer of record for Wingstop, per its TDLR project registration.

Who is the architect or design firm for Wingstop?

Wilkus Architects is the design firm of record for Wingstop, according to its TDLR filing.

How much does Wingstop cost and how big is it?

Wingstop has an estimated construction value of $175K and approximately 1,214 square feet (about $144/sqft), based on its TDLR filing.

📋Scope of Work

Tenant finish out of an existing shell building. Work includes new walls, finishes, restrooms, mechanical equipment, and plumbing/electrical rough-ins for new equipment. There will be no exterior work.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.