Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

333 E. Division St.

333 E. Division St., Arlington, TX 76011, Arlington, TX, 76011

333 E. Division St. is a renovation/alteration project at 333 E. Division St., Arlington, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.3M across about 6,641 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2023018302

$1.3M

Project Value

6,641

Square Feet

$196/sqft

Cost/SqFt

4 months

Duration

Registered:May 4, 2023

Start:Jun 8, 2023

Target:Oct 11, 2023

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

333 E. Division St. is a Renovation/Alteration project located at 333 E. Division St., Arlington, TX 76011 in Arlington, Texas. The project has an estimated value of $1.3M covering 6,641 sq ft. Ryan Dodson is the property owner and Studio97w is the design firm of record. The project was registered with TDLR on May 4, 2023.

❓Frequently Asked Questions

What is 333 E. Division St.?

333 E. Division St. is a renovation/alteration project at 333 E. Division St. in Arlington, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: INTERIOR AND EXTERIOR REMODEL WITH SITE MODIFICATIONS FOR FUTURE TENANT LEASE SPACE INCLUDING MECHANICAL, ELECTRICAL, PLUMBING, AND CIVIL WORK.

Is 333 E. Division St. open in Arlington?

333 E. Division St. is currently under construction in Arlington, TX. Its current TDLR status is "Project Registered".

Where is 333 E. Division St. located?

333 E. Division St. is located at 333 E. Division St., Arlington, TX, 76011, in Tarrant County.

Who is the owner or developer of 333 E. Division St.?

Ryan Dodson is the property owner/developer of record for 333 E. Division St., per its TDLR project registration.

Who is the architect or design firm for 333 E. Division St.?

Studio97w is the design firm of record for 333 E. Division St., according to its TDLR filing.

How much does 333 E. Division St. cost and how big is it?

333 E. Division St. has an estimated construction value of $1.3M and approximately 6,641 square feet (about $196/sqft), based on its TDLR filing.

📋Scope of Work

INTERIOR AND EXTERIOR REMODEL WITH SITE MODIFICATIONS FOR FUTURE TENANT LEASE SPACE INCLUDING MECHANICAL, ELECTRICAL, PLUMBING, AND CIVIL WORK.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.