Miller Milling Office Renovation
Miller Milling Office Renovation is a renovation/alteration project at 221 Fairmount St, Saginaw, TX 76179, Saginaw, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2025). The project has an estimated value of $800K across about 4,143 sq ft.
📊Project Metrics
TDLR #TABS2023027156Inspection Complete
Final inspection completed, awaiting project closure
Miller Milling Office Renovation is a Renovation/Alteration project located at 221 Fairmount St, Saginaw, TX 76179, Saginaw, TX 76179 in Saginaw, Texas. The project has an estimated value of $800K covering 4,143 sq ft. BERKELEY INVESTMENTS LTD is the property owner and SBL Architecture Inc is the design firm of record. The project was registered with TDLR on August 30, 2023.
❓Frequently Asked Questions
What is Miller Milling Office Renovation?
Miller Milling Office Renovation is a renovation/alteration project at 221 Fairmount St, Saginaw, TX 76179 in Saginaw, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Office & Locker room renovation
Is Miller Milling Office Renovation open in Saginaw?
Construction on Miller Milling Office Renovation is complete — TDLR records show the project passed its required accessibility inspection in Jan 2025. The building is finished and very likely open.
Where is Miller Milling Office Renovation located?
Miller Milling Office Renovation is located at 221 Fairmount St, Saginaw, TX 76179, Saginaw, TX, 76179, in Tarrant County.
Who is the owner or developer of Miller Milling Office Renovation?
BERKELEY INVESTMENTS LTD is the property owner/developer of record for Miller Milling Office Renovation, per its TDLR project registration.
Who is the architect or design firm for Miller Milling Office Renovation?
SBL Architecture Inc is the design firm of record for Miller Milling Office Renovation, according to its TDLR filing.
How much does Miller Milling Office Renovation cost and how big is it?
Miller Milling Office Renovation has an estimated construction value of $800K and approximately 4,143 square feet (about $193/sqft), based on its TDLR filing.
📋Scope of Work
Office & Locker room renovation
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Aug 30, 2023
Review Complete
Inspection Complete
Jan 1, 2025
Closed