Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Liquitek Maintenance Building

408 113th Street, Arlington, TX 76011, Arlington, TX, 76011

Liquitek Maintenance Building is a new construction project at 408 113th Street, Arlington, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.2M across about 5,885 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2024000477

$1.2M

Project Value

5,885

Square Feet

$204/sqft

Cost/SqFt

10 months

Duration

Registered:Sep 8, 2023

Start:Dec 1, 2023

Target:Oct 1, 2024

📝

Review Complete

Design review complete, construction may proceed

Liquitek Maintenance Building is a New Construction project located at 408 113th Street, Arlington, TX 76011 in Arlington, Texas. The project has an estimated value of $1.2M covering 5,885 sq ft. Henggeler Properties is the property owner and Terry R. Cunningham Architects is the design firm of record. The project was registered with TDLR on September 8, 2023.

❓Frequently Asked Questions

What is Liquitek Maintenance Building?

Liquitek Maintenance Building is a new construction project at 408 113th Street in Arlington, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Truck maintenance facility with parking lot and fire lane.

Is Liquitek Maintenance Building open in Arlington?

Liquitek Maintenance Building is currently under construction in Arlington, TX. Its current TDLR status is "Review Complete".

Where is Liquitek Maintenance Building located?

Liquitek Maintenance Building is located at 408 113th Street, Arlington, TX, 76011, in Tarrant County.

Who is the owner or developer of Liquitek Maintenance Building?

Henggeler Properties is the property owner/developer of record for Liquitek Maintenance Building, per its TDLR project registration.

Who is the architect or design firm for Liquitek Maintenance Building?

Terry R. Cunningham Architects is the design firm of record for Liquitek Maintenance Building, according to its TDLR filing.

How much does Liquitek Maintenance Building cost and how big is it?

Liquitek Maintenance Building has an estimated construction value of $1.2M and approximately 5,885 square feet (about $204/sqft), based on its TDLR filing.

📋Scope of Work

Truck maintenance facility with parking lot and fire lane.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.