US Micro Products
US Micro Products is a renovation/alteration project at 8701 Bee Cave Road Suite #330, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jun 2024). The project has an estimated value of $500K across about 2,780 sq ft.
📊Project Metrics
TDLR #TABS2024003227Project Closed
Project has been completed and closed
US Micro Products is a Renovation/Alteration project located at 8701 Bee Cave Road Suite #330, Austin, TX 78746 in Austin, Texas. The project has an estimated value of $500K covering 2,780 sq ft. Riverside Resources is the property owner. The project was registered with TDLR on October 16, 2023.
❓Frequently Asked Questions
What is US Micro Products?
US Micro Products is a renovation/alteration project at 8701 Bee Cave Road Suite #330 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Interior renovation of first generation space consisting of 2,780 SF
Is US Micro Products open in Austin?
Construction on US Micro Products is complete — TDLR records show the project passed its required accessibility inspection in Jun 2024. The building is finished and very likely open.
Where is US Micro Products located?
US Micro Products is located at 8701 Bee Cave Road Suite #330, Austin, TX, 78746, in Travis County.
Who is the owner or developer of US Micro Products?
Riverside Resources is the property owner/developer of record for US Micro Products, per its TDLR project registration.
How much does US Micro Products cost and how big is it?
US Micro Products has an estimated construction value of $500K and approximately 2,780 square feet (about $180/sqft), based on its TDLR filing.
📋Scope of Work
Interior renovation of first generation space consisting of 2,780 SF
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Oct 16, 2023
Review Complete
Inspection Complete
Closed
Jun 30, 2024
🔗Related Projects
📄Related City Permits
Building permits found at or near this location
12x25 Pool with autofill NG heater and ASTM F1346 Automatic safety cover.
Replacement of complete existing central heat and air system with or without duct work Install replacement of 4 Ton AC System
Front yard residential irrigation system. 6 zone system including 3 dripper irrigation zones (2 for strips by road 1 for flower bed) and 3 mp rotator grass zones (2 side yard zones and 1 main front yard zone). Master valve isolation valve double check valve assembly rain sensor and rachio control box included in system. Trench depth to be 8 to 10 inches 6 inches of fill on top of pipes. Main line will horseshoe around the house so trenching will be done through the back yard for wiring and mainline. No back yard irrigation zones. 4 inch pop up heads used secured to class 200 3/4 inch lateral line pipe using swing pipe. Mainline to be 1 inch pipe. Purple primer and blue glue used for all connections.
MAIN ELECTRICAL SERVICE UPGRADE TO 200 AMPS
Replacement of an existing water heater WATER HEATER TANKLESS CHANGE-OUT