Construction complete · Jan 2024🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Clopton Farms Section 1

Clopton Farms Drive, Conroe, TX 77316, Conroe, TX, 77316

Clopton Farms Section 1 is a new construction project at Clopton Farms Drive, Conroe, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2024). The project has an estimated value of $3.5M across about 3,000 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024003699

$3.5M

Project Value

3,000

Square Feet

$1.17K/sqft

Cost/SqFt

1 months

Duration

Registered:Oct 23, 2023

Start:Nov 27, 2023

Target:Jan 5, 2024

🏁

Project Closed

Project has been completed and closed

Clopton Farms Section 1 is a New Construction project located at Clopton Farms Drive, Conroe, TX 77316 in Conroe, Texas. The project has an estimated value of $3.5M covering 3,000 sq ft. Tri Pointe Homes Texas is the property owner and Bleyl Engineering is the design firm of record. The project was registered with TDLR on October 23, 2023.

❓Frequently Asked Questions

What is Clopton Farms Section 1?

Clopton Farms Section 1 is a new construction project at Clopton Farms Drive in Conroe, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: construction of 43 lots, water, sanitary, storm and detention.

Is Clopton Farms Section 1 open in Conroe?

Construction on Clopton Farms Section 1 is complete — TDLR records show the project passed its required accessibility inspection in Jan 2024. The building is finished and very likely open.

Where is Clopton Farms Section 1 located?

Clopton Farms Section 1 is located at Clopton Farms Drive, Conroe, TX, 77316, in Montgomery County.

Who is the owner or developer of Clopton Farms Section 1?

Tri Pointe Homes Texas is the property owner/developer of record for Clopton Farms Section 1, per its TDLR project registration.

Who is the architect or design firm for Clopton Farms Section 1?

Bleyl Engineering is the design firm of record for Clopton Farms Section 1, according to its TDLR filing.

How much does Clopton Farms Section 1 cost and how big is it?

Clopton Farms Section 1 has an estimated construction value of $3.5M and approximately 3,000 square feet (about $1.17K/sqft), based on its TDLR filing.

📋Scope of Work

construction of 43 lots, water, sanitary, storm and detention.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.