Construction complete · Jan 2026🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Conroe Welding Supply

4405 N. Frazier St., Conroe, TX 77303, Conroe, TX, 77303

Conroe Welding Supply is a new construction project at 4405 N. Frazier St., Conroe, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Jan 2026). The project has an estimated value of $5.0M across about 39,037 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024003842

$5.0M

Project Value

39,037

Square Feet

$128/sqft

Cost/SqFt

1y 11mo

Duration

Registered:Oct 24, 2023

Start:Dec 1, 2023

Target:Nov 1, 2025

🏁

Project Closed

Project has been completed and closed

Conroe Welding Supply is a New Construction project located at 4405 N. Frazier St., Conroe, TX 77303 in Conroe, Texas. The project has an estimated value of $5.0M covering 39,037 sq ft. Ricky Morton is the property owner and Huffco Services, Inc is the design firm of record. The project was registered with TDLR on October 24, 2023.

❓Frequently Asked Questions

What is Conroe Welding Supply?

Conroe Welding Supply is a new construction project at 4405 N. Frazier St. in Conroe, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The construction of 2 pre-engineered metal buildings and parking lot

Is Conroe Welding Supply open in Conroe?

Construction on Conroe Welding Supply is complete — TDLR records show the project passed its required accessibility inspection in Jan 2026. The building is finished and very likely open.

Where is Conroe Welding Supply located?

Conroe Welding Supply is located at 4405 N. Frazier St., Conroe, TX, 77303, in Montgomery County.

Who is the owner or developer of Conroe Welding Supply?

Ricky Morton is the property owner/developer of record for Conroe Welding Supply, per its TDLR project registration.

Who is the architect or design firm for Conroe Welding Supply?

Huffco Services, Inc is the design firm of record for Conroe Welding Supply, according to its TDLR filing.

How much does Conroe Welding Supply cost and how big is it?

Conroe Welding Supply has an estimated construction value of $5.0M and approximately 39,037 square feet (about $128/sqft), based on its TDLR filing.

📋Scope of Work

The construction of 2 pre-engineered metal buildings and parking lot

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.