Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

Penske

2041 W. Commerce Street, Dallas, TX 75208, Dallas, TX, 75208

Penske is a new construction project at 2041 W. Commerce Street, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $10.0M across about 12,654 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2024012192

$10.0M

Project Value

12,654

Square Feet

$790/sqft

Cost/SqFt

1y 9mo

Duration

Registered:Feb 22, 2024

Start:Aug 5, 2024

Target:May 9, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Penske is a New Construction project located at 2041 W. Commerce Street, Dallas, TX 75208 in Dallas, Texas. The project has an estimated value of $10.0M covering 12,654 sq ft. Penske Truck Leasing is the property owner and Cambursa & Theodore, LTD is the design firm of record. The project was registered with TDLR on February 22, 2024.

❓Frequently Asked Questions

What is Penske?

Penske is a new construction project at 2041 W. Commerce Street in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New truck leasing facility that includes a three-bay service area, 1 wash bay, a 1 story office building and a storage/equipment mezzanine above the office.

Is Penske open in Dallas?

Penske is currently under construction in Dallas, TX. Its current TDLR status is "Project Registered".

Where is Penske located?

Penske is located at 2041 W. Commerce Street, Dallas, TX, 75208, in Dallas County.

Who is the owner or developer of Penske?

Penske Truck Leasing is the property owner/developer of record for Penske, per its TDLR project registration.

Who is the architect or design firm for Penske?

Cambursa & Theodore, LTD is the design firm of record for Penske, according to its TDLR filing.

How much does Penske cost and how big is it?

Penske has an estimated construction value of $10.0M and approximately 12,654 square feet (about $790/sqft), based on its TDLR filing.

📋Scope of Work

New truck leasing facility that includes a three-bay service area, 1 wash bay, a 1 story office building and a storage/equipment mezzanine above the office.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.