Project has been completed and closed
UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno is a Renovation/Alteration project located at 602 Indiana Avenue, Lubbock, TX 79415 in Lubbock, Texas. The project has an estimated value of $435K covering 800 sq ft. University Medical Center is the property owner and Condray Design Group is the design firm of record. The project was registered with TDLR on February 28, 2024.
UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno is a renovation/alteration project at 602 Indiana Avenue, Lubbock, TX 79415 in Lubbock, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Reno of spaces totaling approx 800 sqft within the Main Hospital 6th floor Cath Lab #4, Control Room, and Equipment Room to support equipment replacement
Construction on UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno is complete — TDLR records show the project passed its required accessibility inspection in Sep 2024. The building is finished and very likely open.
UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno is located at 602 Indiana Avenue, Lubbock, TX 79415, Lubbock, TX, 79415, in Lubbock County.
University Medical Center is the property owner/developer of record for UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno, per its TDLR project registration.
Condray Design Group is the design firm of record for UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno, according to its TDLR filing.
UMC Imaging Room Mod Ph 3 - Cath Lab Rm #4 Reno has an estimated construction value of $435K and approximately 800 square feet (about $544/sqft), based on its TDLR filing.
Reno of spaces totaling approx 800 sqft within the Main Hospital 6th floor Cath Lab #4, Control Room, and Equipment Room to support equipment replacement
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Feb 28, 2024
Review Complete
Inspection Complete
Closed
Sep 1, 2024
