811 Barton Springs Road Floor 5 infill
811 Barton Springs Road Floor 5 infill is a additions to existing building project at 811 Barton Springs Rd Floor 5, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Aug 2024). The project has an estimated value of $400K across about 763 sq ft.
📊Project Metrics
TDLR #TABS2024017108Project Closed
Project has been completed and closed
811 Barton Springs Road Floor 5 infill is a Additions to Existing Building project located at 811 Barton Springs Rd Floor 5, Austin, TX 78704 in Austin, Texas. The project has an estimated value of $400K covering 763 sq ft. CPF 811 Barton LLC c/o Transwestern is the property owner and Red Design Studios is the design firm of record. The project was registered with TDLR on April 26, 2024.
❓Frequently Asked Questions
What is 811 Barton Springs Road Floor 5 infill?
811 Barton Springs Road Floor 5 infill is a additions to existing building project at 811 Barton Springs Rd Floor 5 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Infilling an opening between the 4th and 5th floor for a new office space
Is 811 Barton Springs Road Floor 5 infill open in Austin?
Construction on 811 Barton Springs Road Floor 5 infill is complete — TDLR records show the project passed its required accessibility inspection in Aug 2024. The building is finished and very likely open.
Where is 811 Barton Springs Road Floor 5 infill located?
811 Barton Springs Road Floor 5 infill is located at 811 Barton Springs Rd Floor 5, Austin, TX, 78704, in Travis County.
Who is the owner or developer of 811 Barton Springs Road Floor 5 infill?
CPF 811 Barton LLC c/o Transwestern is the property owner/developer of record for 811 Barton Springs Road Floor 5 infill, per its TDLR project registration.
Who is the architect or design firm for 811 Barton Springs Road Floor 5 infill?
Red Design Studios is the design firm of record for 811 Barton Springs Road Floor 5 infill, according to its TDLR filing.
How much does 811 Barton Springs Road Floor 5 infill cost and how big is it?
811 Barton Springs Road Floor 5 infill has an estimated construction value of $400K and approximately 763 square feet (about $524/sqft), based on its TDLR filing.
📋Scope of Work
Infilling an opening between the 4th and 5th floor for a new office space
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Apr 26, 2024
Review Complete
Inspection Complete
Closed
Aug 30, 2024
🔗Related Projects
👤Same Owner
$7.8M total📄Related City Permits
Building permits found at or near this location
New construction single-family residential 2-story 3bedroom 2.5 bath with attached 2-car garage covered front porch and covered rear patio.
EV Charger
200A Service Upgrade
New construction of 2-story single-family dwelling with 4 bedrooms and 3.5 baths 2 car garage rear patio and front porch
Express- Remove and reinstall siding. No other changes. Will need electrical permit to temporarily shut off power to replace siding behind electrical.