Construction complete · May 2024🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

RS Electronics

7151 Jack Newell Blvd. S, Fort Worth, TX 76118, Fort Worth, TX, 76118

RS Electronics is a new construction project at 7151 Jack Newell Blvd. S, Fort Worth, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed May 2024). The project has an estimated value of $300K across about 4,114 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024017506

$300K

Project Value

4,114

Square Feet

$73/sqft

Cost/SqFt

0 months

Duration

Registered:May 1, 2024

Start:May 10, 2024

Target:May 17, 2024

🏁

Project Closed

Project has been completed and closed

RS Electronics is a New Construction project located at 7151 Jack Newell Blvd. S, Fort Worth, TX 76118 in Fort Worth, Texas. The project has an estimated value of $300K covering 4,114 sq ft. ALLIED ELECTRONICS INC is the property owner. The project was registered with TDLR on May 1, 2024.

❓Frequently Asked Questions

What is RS Electronics?

RS Electronics is a new construction project at 7151 Jack Newell Blvd. S in Fort Worth, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of interior conveyor and storage rack system (ASRS) in an existing building.

Is RS Electronics open in Fort Worth?

Construction on RS Electronics is complete — TDLR records show the project passed its required accessibility inspection in May 2024. The building is finished and very likely open.

Where is RS Electronics located?

RS Electronics is located at 7151 Jack Newell Blvd. S, Fort Worth, TX, 76118, in Tarrant County.

Who is the owner or developer of RS Electronics?

ALLIED ELECTRONICS INC is the property owner/developer of record for RS Electronics, per its TDLR project registration.

How much does RS Electronics cost and how big is it?

RS Electronics has an estimated construction value of $300K and approximately 4,114 square feet (about $73/sqft), based on its TDLR filing.

📋Scope of Work

Installation of interior conveyor and storage rack system (ASRS) in an existing building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.