Construction complete · Sep 2024🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Gino's Italian Joint

304 Morton Street, Richmond, TX 77469, Richmond, TX, 77469

Gino's Italian Joint is a renovation/alteration project at 304 Morton Street, Richmond, in Fort Bend County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Sep 2024). The project has an estimated value of $300K across about 3,600 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024017806

$300K

Project Value

3,600

Square Feet

$83/sqft

Cost/SqFt

3 months

Duration

Registered:May 6, 2024

Start:Jun 21, 2024

Target:Sep 30, 2024

🏁

Project Closed

Project has been completed and closed

Gino's Italian Joint is a Renovation/Alteration project located at 304 Morton Street, Richmond, TX 77469 in Richmond, Texas. The project has an estimated value of $300K covering 3,600 sq ft. Morton Street Investments is the property owner and studio M6 is the design firm of record. The project was registered with TDLR on May 6, 2024.

❓Frequently Asked Questions

What is Gino's Italian Joint?

Gino's Italian Joint is a renovation/alteration project at 304 Morton Street in Richmond, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The space will be used as an Italian restaurant. The restaurant includes a kitchen, dining area and bakery.

Is Gino's Italian Joint open in Richmond?

Construction on Gino's Italian Joint is complete — TDLR records show the project passed its required accessibility inspection in Sep 2024. The building is finished and very likely open.

Where is Gino's Italian Joint located?

Gino's Italian Joint is located at 304 Morton Street, Richmond, TX, 77469, in Fort Bend County.

Who is the owner or developer of Gino's Italian Joint?

Morton Street Investments is the property owner/developer of record for Gino's Italian Joint, per its TDLR project registration.

Who is the architect or design firm for Gino's Italian Joint?

studio M6 is the design firm of record for Gino's Italian Joint, according to its TDLR filing.

How much does Gino's Italian Joint cost and how big is it?

Gino's Italian Joint has an estimated construction value of $300K and approximately 3,600 square feet (about $83/sqft), based on its TDLR filing.

📋Scope of Work

The space will be used as an Italian restaurant. The restaurant includes a kitchen, dining area and bakery.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.