Construction complete · Feb 2025🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Caliber Collision

1400 E Ferguson Ave, Pharr, TX 78577, Pharr, TX, 78577

Caliber Collision is a new construction project at 1400 E Ferguson Ave, Pharr, in Hidalgo County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2025). The project has an estimated value of $1.6M across about 16,964 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024018824

$1.6M

Project Value

16,964

Square Feet

$93/sqft

Cost/SqFt

7 months

Duration

Registered:May 17, 2024

Start:Jul 22, 2024

Target:Feb 21, 2025

🏁

Project Closed

Project has been completed and closed

Caliber Collision is a New Construction project located at 1400 E Ferguson Ave, Pharr, TX 78577 in Pharr, Texas. The project has an estimated value of $1.6M covering 16,964 sq ft. Cross Development CC Pharr, LLC is the property owner and FWH Architects, Inc. is the design firm of record. The project was registered with TDLR on May 17, 2024.

❓Frequently Asked Questions

What is Caliber Collision?

Caliber Collision is a new construction project at 1400 E Ferguson Ave in Pharr, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New commercial construction of a 16,964sf free standing building.

Is Caliber Collision open in Pharr?

Construction on Caliber Collision is complete — TDLR records show the project passed its required accessibility inspection in Feb 2025. The building is finished and very likely open.

Where is Caliber Collision located?

Caliber Collision is located at 1400 E Ferguson Ave, Pharr, TX, 78577, in Hidalgo County.

Who is the owner or developer of Caliber Collision?

Cross Development CC Pharr, LLC is the property owner/developer of record for Caliber Collision, per its TDLR project registration.

Who is the architect or design firm for Caliber Collision?

FWH Architects, Inc. is the design firm of record for Caliber Collision, according to its TDLR filing.

How much does Caliber Collision cost and how big is it?

Caliber Collision has an estimated construction value of $1.6M and approximately 16,964 square feet (about $93/sqft), based on its TDLR filing.

📋Scope of Work

New commercial construction of a 16,964sf free standing building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.