Construction complete · Feb 2026✅Inspection Complete🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

United Steel Supply

333 Eurostar Drive, Pleasanton, TX 78064, Pleasanton, TX, 78064

United Steel Supply is a additions to existing building project at 333 Eurostar Drive, Pleasanton, in Atascosa County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2026). The project has an estimated value of $50K across about 625 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2024019868

$50K

Project Value

625

Square Feet

$80/sqft

Cost/SqFt

6 months

Duration

Registered:Jun 3, 2024

Start:Jul 1, 2024

Target:Dec 31, 2024

✅

Inspection Complete

Final inspection completed, awaiting project closure

United Steel Supply is a Additions to Existing Building project located at 333 Eurostar Drive, Pleasanton, TX 78064 in Pleasanton, Texas. The project has an estimated value of $50K covering 625 sq ft. United Steel Supply LLC is the property owner and RDG Architecture & Development is the design firm of record. The project was registered with TDLR on June 3, 2024.

❓Frequently Asked Questions

What is United Steel Supply?

United Steel Supply is a additions to existing building project at 333 Eurostar Drive in Pleasanton, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 625 sf Interior Office/Restroom Addition

Is United Steel Supply open in Pleasanton?

Construction on United Steel Supply is complete — TDLR records show the project passed its required accessibility inspection in Feb 2026. The building is finished and very likely open.

Where is United Steel Supply located?

United Steel Supply is located at 333 Eurostar Drive, Pleasanton, TX, 78064, in Atascosa County.

Who is the owner or developer of United Steel Supply?

United Steel Supply LLC is the property owner/developer of record for United Steel Supply, per its TDLR project registration.

Who is the architect or design firm for United Steel Supply?

RDG Architecture & Development is the design firm of record for United Steel Supply, according to its TDLR filing.

How much does United Steel Supply cost and how big is it?

United Steel Supply has an estimated construction value of $50K and approximately 625 square feet (about $80/sqft), based on its TDLR filing.

📋Scope of Work

625 sf Interior Office/Restroom Addition

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.