HOLA Spanish Immersion is a renovation/alteration project at 11204 FM 1826, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $50K across about 2,100 sq ft.
Project has been registered with TDLR and is in pre-construction phase
HOLA Spanish Immersion is a Renovation/Alteration project located at 11204 FM 1826, Austin, TX 78737 in Austin, Texas. The project has an estimated value of $50K covering 2,100 sq ft. Gustavo Moreno is the property owner. The project was registered with TDLR on June 3, 2024.
HOLA Spanish Immersion is a renovation/alteration project at 11204 FM 1826 in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Modifications to submit a Change of Occupancy from residential to I4
HOLA Spanish Immersion is currently under construction in Austin, TX. Its current TDLR status is "Project Registered".
HOLA Spanish Immersion is located at 11204 FM 1826, Austin, TX, 78737, in Travis County.
Gustavo Moreno is the property owner/developer of record for HOLA Spanish Immersion, per its TDLR project registration.
HOLA Spanish Immersion has an estimated construction value of $50K and approximately 2,100 square feet (about $24/sqft), based on its TDLR filing.
Modifications to submit a Change of Occupancy from residential to I4
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Jun 3, 2024
Review Complete
Inspection Complete
Closed
Building permits found at or near this location
Replacement of complete existing central heat and air system with or without duct work
Limb fell on overhead feeder and broke the service pole. New pole needs to be set and new service 200 amp service built
Express: Foundation repair (14 total press piling-12 perimeter and 2 interior-5 breakthrough and patched locations)
Run a feeder from the existing main service panel (which has available space) to the shed (125 sq ft). The run will be routed in conduit along the exterior of my home transitioning to underground conduit once it enters the yard.
Installation of a mini split heat pump for a 125 sq ft shed
