Construction complete · Dec 2024🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Jeter Funeral Home, Garage

311 N. Friendswood Dr., Friendswood, TX 77546, Friendswood, TX, 77546

Jeter Funeral Home, Garage is a new construction project at 311 N. Friendswood Dr., Friendswood, in Galveston County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2024). The project has an estimated value of $163K across about 835 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2024020575

$163K

Project Value

835

Square Feet

$195/sqft

Cost/SqFt

6 months

Duration

Registered:Jun 11, 2024

Start:Jun 25, 2024

Target:Dec 23, 2024

🏁

Project Closed

Project has been completed and closed

Jeter Funeral Home, Garage is a New Construction project located at 311 N. Friendswood Dr., Friendswood, TX 77546 in Friendswood, Texas. The project has an estimated value of $163K covering 835 sq ft. Gregory Jeter is the property owner and Rives Designers, LLC is the design firm of record. The project was registered with TDLR on June 11, 2024.

❓Frequently Asked Questions

What is Jeter Funeral Home, Garage?

Jeter Funeral Home, Garage is a new construction project at 311 N. Friendswood Dr. in Friendswood, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: An 835 sq. ft. Garage / Crematory. Brick and metal building

Is Jeter Funeral Home, Garage open in Friendswood?

Construction on Jeter Funeral Home, Garage is complete — TDLR records show the project passed its required accessibility inspection in Dec 2024. The building is finished and very likely open.

Where is Jeter Funeral Home, Garage located?

Jeter Funeral Home, Garage is located at 311 N. Friendswood Dr., Friendswood, TX, 77546, in Galveston County.

Who is the owner or developer of Jeter Funeral Home, Garage?

Gregory Jeter is the property owner/developer of record for Jeter Funeral Home, Garage, per its TDLR project registration.

Who is the architect or design firm for Jeter Funeral Home, Garage?

Rives Designers, LLC is the design firm of record for Jeter Funeral Home, Garage, according to its TDLR filing.

How much does Jeter Funeral Home, Garage cost and how big is it?

Jeter Funeral Home, Garage has an estimated construction value of $163K and approximately 835 square feet (about $195/sqft), based on its TDLR filing.

📋Scope of Work

An 835 sq. ft. Garage / Crematory. Brick and metal building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.