Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Clinton Orthodontics

433 Singing Oaks, Spring Branch, TX 78070, Spring Branch, TX, 78070

Clinton Orthodontics is a new construction project at 433 Singing Oaks, Spring Branch, in Comal County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $2.0M across about 5,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025000983

$2.0M

Project Value

5,000

Square Feet

$400/sqft

Cost/SqFt

8 months

Duration

Registered:Sep 13, 2024

Start:Nov 4, 2024

Target:Jul 7, 2025

📝

Review Complete

Design review complete, construction may proceed

Clinton Orthodontics is a New Construction project located at 433 Singing Oaks, Spring Branch, TX 78070 in Spring Branch, Texas. The project has an estimated value of $2.0M covering 5,000 sq ft. Michelle Clinton is the property owner and MCM Design Group is the design firm of record. The project was registered with TDLR on September 13, 2024.

❓Frequently Asked Questions

What is Clinton Orthodontics?

Clinton Orthodontics is a new construction project at 433 Singing Oaks in Spring Branch, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: This project is a new 5,000sf ground-up wood framed construction shell building with a 3,000 sf finish-out for an orthodontics practice.

Is Clinton Orthodontics open in Spring Branch?

Clinton Orthodontics is currently under construction in Spring Branch, TX. Its current TDLR status is "Review Complete".

Where is Clinton Orthodontics located?

Clinton Orthodontics is located at 433 Singing Oaks, Spring Branch, TX, 78070, in Comal County.

Who is the owner or developer of Clinton Orthodontics?

Michelle Clinton is the property owner/developer of record for Clinton Orthodontics, per its TDLR project registration.

Who is the architect or design firm for Clinton Orthodontics?

MCM Design Group is the design firm of record for Clinton Orthodontics, according to its TDLR filing.

How much does Clinton Orthodontics cost and how big is it?

Clinton Orthodontics has an estimated construction value of $2.0M and approximately 5,000 square feet (about $400/sqft), based on its TDLR filing.

📋Scope of Work

This project is a new 5,000sf ground-up wood framed construction shell building with a 3,000 sf finish-out for an orthodontics practice.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.