Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Delaware Springs Section 25

Delaware Springs blvd, Burnet, TX 78611, Burnet, TX, 78611

Delaware Springs Section 25 is a new construction project at Delaware Springs blvd, Burnet, in Burnet County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.1M across about 10,384 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025003489

$1.1M

Project Value

10,384

Square Feet

$106/sqft

Cost/SqFt

1y 4mo

Duration

Registered:Oct 17, 2024

Start:Dec 1, 2024

Target:Apr 1, 2026

📝

Review Complete

Design review complete, construction may proceed

Delaware Springs Section 25 is a New Construction project located at Delaware Springs blvd, Burnet, TX 78611 in Burnet, Texas. The project has an estimated value of $1.1M covering 10,384 sq ft. Delaware Springs Ranch Investments LLC is the property owner and Cuatro Consultants is the design firm of record. The project was registered with TDLR on October 17, 2024.

❓Frequently Asked Questions

What is Delaware Springs Section 25?

Delaware Springs Section 25 is a new construction project at Delaware Springs blvd in Burnet, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of 26 single family residential lots with one drainage/water quality lot and associated infrastructure.

Is Delaware Springs Section 25 open in Burnet?

Delaware Springs Section 25 is currently under construction in Burnet, TX. Its current TDLR status is "Review Complete".

Where is Delaware Springs Section 25 located?

Delaware Springs Section 25 is located at Delaware Springs blvd, Burnet, TX, 78611, in Burnet County.

Who is the owner or developer of Delaware Springs Section 25?

Delaware Springs Ranch Investments LLC is the property owner/developer of record for Delaware Springs Section 25, per its TDLR project registration.

Who is the architect or design firm for Delaware Springs Section 25?

Cuatro Consultants is the design firm of record for Delaware Springs Section 25, according to its TDLR filing.

How much does Delaware Springs Section 25 cost and how big is it?

Delaware Springs Section 25 has an estimated construction value of $1.1M and approximately 10,384 square feet (about $106/sqft), based on its TDLR filing.

📋Scope of Work

Construction of 26 single family residential lots with one drainage/water quality lot and associated infrastructure.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.