Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Garland Racking Modification

4409 Action St, Garland, TX 75402, Garland, TX, 75402

Garland Racking Modification is a renovation/alteration project at 4409 Action St, Garland, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $82K across about 33,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025003763

$82K

Project Value

33,000

Square Feet

$2/sqft

Cost/SqFt

1 months

Duration

Registered:Oct 22, 2024

Start:Dec 27, 2024

Target:Jan 17, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Garland Racking Modification is a Renovation/Alteration project located at 4409 Action St, Garland, TX 75402 in Garland, Texas. The project has an estimated value of $82K covering 33,000 sq ft. 4409 Action LLC is the property owner and Darr Equipment is the design firm of record. The project was registered with TDLR on October 22, 2024.

❓Frequently Asked Questions

What is Garland Racking Modification?

Garland Racking Modification is a renovation/alteration project at 4409 Action St in Garland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Upright racking modification.

Is Garland Racking Modification open in Garland?

Garland Racking Modification is currently under construction in Garland, TX. Its current TDLR status is "Project Registered".

Where is Garland Racking Modification located?

Garland Racking Modification is located at 4409 Action St, Garland, TX, 75402, in Dallas County.

Who is the owner or developer of Garland Racking Modification?

4409 Action LLC is the property owner/developer of record for Garland Racking Modification, per its TDLR project registration.

Who is the architect or design firm for Garland Racking Modification?

Darr Equipment is the design firm of record for Garland Racking Modification, according to its TDLR filing.

How much does Garland Racking Modification cost and how big is it?

Garland Racking Modification has an estimated construction value of $82K and approximately 33,000 square feet (about $2/sqft), based on its TDLR filing.

📋Scope of Work

Upright racking modification.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.