Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Carbide Technologies

616 Vermillion Drive, Pasadena, TX 77506, Pasadena, TX, 77506

Carbide Technologies is a new construction project at 616 Vermillion Drive, Pasadena, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.5M across about 7,999 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025004662

$1.5M

Project Value

7,999

Square Feet

$188/sqft

Cost/SqFt

4 months

Duration

Registered:Nov 1, 2024

Start:May 5, 2025

Target:Sep 1, 2025

📝

Review Complete

Design review complete, construction may proceed

Carbide Technologies is a New Construction project located at 616 Vermillion Drive, Pasadena, TX 77506 in Pasadena, Texas. The project has an estimated value of $1.5M covering 7,999 sq ft. Jose Contreras is the property owner and H2b Inc, is the design firm of record. The project was registered with TDLR on November 1, 2024.

❓Frequently Asked Questions

What is Carbide Technologies?

Carbide Technologies is a new construction project at 616 Vermillion Drive in Pasadena, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Pre-Engineered Metal Building Warehouse for Metal Fabrication

Is Carbide Technologies open in Pasadena?

Carbide Technologies is currently under construction in Pasadena, TX. Its current TDLR status is "Review Complete".

Where is Carbide Technologies located?

Carbide Technologies is located at 616 Vermillion Drive, Pasadena, TX, 77506, in Harris County.

Who is the owner or developer of Carbide Technologies?

Jose Contreras is the property owner/developer of record for Carbide Technologies, per its TDLR project registration.

Who is the architect or design firm for Carbide Technologies?

H2b Inc, is the design firm of record for Carbide Technologies, according to its TDLR filing.

How much does Carbide Technologies cost and how big is it?

Carbide Technologies has an estimated construction value of $1.5M and approximately 7,999 square feet (about $188/sqft), based on its TDLR filing.

📋Scope of Work

New Pre-Engineered Metal Building Warehouse for Metal Fabrication

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.