Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

MANUFACTURING BUILDING- 2 For Rio Marine

16006 2ND STREET, Channelview, TX 77530, Channelview, TX, 77530

MANUFACTURING BUILDING- 2 For Rio Marine is a new construction project at 16006 2ND STREET, Channelview, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $2.7M across about 36,000 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025007668

$2.7M

Project Value

36,000

Square Feet

$75/sqft

Cost/SqFt

1 year

Duration

Registered:Dec 13, 2024

Start:Mar 1, 2025

Target:Mar 1, 2026

📝

Review Complete

Design review complete, construction may proceed

MANUFACTURING BUILDING- 2 For Rio Marine is a New Construction project located at 16006 2ND STREET, Channelview, TX 77530 in Channelview, Texas. The project has an estimated value of $2.7M covering 36,000 sq ft. RIO RAL ESTATE 1,LLC is the property owner and ROBERT WALTERS ARCHITECT is the design firm of record. The project was registered with TDLR on December 13, 2024.

❓Frequently Asked Questions

What is MANUFACTURING BUILDING- 2 For Rio Marine?

MANUFACTURING BUILDING- 2 For Rio Marine is a new construction project at 16006 2ND STREET in Channelview, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Construction of a pre-engineered metal building, 1-Story Manufacturing, Office, Storage facility and associated paving.

Is MANUFACTURING BUILDING- 2 For Rio Marine open in Channelview?

MANUFACTURING BUILDING- 2 For Rio Marine is currently under construction in Channelview, TX. Its current TDLR status is "Review Complete".

Where is MANUFACTURING BUILDING- 2 For Rio Marine located?

MANUFACTURING BUILDING- 2 For Rio Marine is located at 16006 2ND STREET, Channelview, TX, 77530, in Harris County.

Who is the owner or developer of MANUFACTURING BUILDING- 2 For Rio Marine?

RIO RAL ESTATE 1,LLC is the property owner/developer of record for MANUFACTURING BUILDING- 2 For Rio Marine, per its TDLR project registration.

Who is the architect or design firm for MANUFACTURING BUILDING- 2 For Rio Marine?

ROBERT WALTERS ARCHITECT is the design firm of record for MANUFACTURING BUILDING- 2 For Rio Marine, according to its TDLR filing.

How much does MANUFACTURING BUILDING- 2 For Rio Marine cost and how big is it?

MANUFACTURING BUILDING- 2 For Rio Marine has an estimated construction value of $2.7M and approximately 36,000 square feet (about $75/sqft), based on its TDLR filing.

📋Scope of Work

Construction of a pre-engineered metal building, 1-Story Manufacturing, Office, Storage facility and associated paving.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.