Under construction📋Project Registered🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

RS MANUFACTURING

5331 W ORANGE STREET, Pearland, TX 77581, Pearland, TX, 77581

RS MANUFACTURING is a additions to existing building project at 5331 W ORANGE STREET, Pearland, in Brazoria County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.7M across about 16,800 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025009935

$1.7M

Project Value

16,800

Square Feet

$100/sqft

Cost/SqFt

8 months

Duration

Registered:Jan 20, 2025

Start:Feb 3, 2025

Target:Oct 3, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

RS MANUFACTURING is a Additions to Existing Building project located at 5331 W ORANGE STREET, Pearland, TX 77581 in Pearland, Texas. The project has an estimated value of $1.7M covering 16,800 sq ft. ROLLAC SHUTTER OF TEXAS, INC. is the property owner and Scott Griffith Architects is the design firm of record. The project was registered with TDLR on January 20, 2025.

❓Frequently Asked Questions

What is RS MANUFACTURING?

RS MANUFACTURING is a additions to existing building project at 5331 W ORANGE STREET in Pearland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: ADD 16,800 SF TILT-WALL STRUCTURE FOR MANUFACTURING. NO PLUMBING, NO CONDITIONED AIR, NO BUILD-OUT, NO RESTROOMS

Is RS MANUFACTURING open in Pearland?

RS MANUFACTURING is currently under construction in Pearland, TX. Its current TDLR status is "Project Registered".

Where is RS MANUFACTURING located?

RS MANUFACTURING is located at 5331 W ORANGE STREET, Pearland, TX, 77581, in Brazoria County.

Who is the owner or developer of RS MANUFACTURING?

ROLLAC SHUTTER OF TEXAS, INC. is the property owner/developer of record for RS MANUFACTURING, per its TDLR project registration.

Who is the architect or design firm for RS MANUFACTURING?

Scott Griffith Architects is the design firm of record for RS MANUFACTURING, according to its TDLR filing.

How much does RS MANUFACTURING cost and how big is it?

RS MANUFACTURING has an estimated construction value of $1.7M and approximately 16,800 square feet (about $100/sqft), based on its TDLR filing.

📋Scope of Work

ADD 16,800 SF TILT-WALL STRUCTURE FOR MANUFACTURING. NO PLUMBING, NO CONDITIONED AIR, NO BUILD-OUT, NO RESTROOMS

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.