Amazon SAT3 - OBD-A Upgrades is a renovation/alteration project at 6806 Cal Turner Drive Pittsburgh Pa 15241, San Antonio, TX 78220, Cal Turner Drive Pittsburgh, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $2.0M across about 150,000 sq ft.
Design review complete, construction may proceed
Amazon SAT3 - OBD-A Upgrades is a Renovation/Alteration project located at 6806 Cal Turner Drive Pittsburgh Pa 15241, San Antonio, TX 78220 in Cal Turner Drive Pittsburgh, Texas. The project has an estimated value of $2.0M covering 150,000 sq ft. USRE STAR LLC DBA AMAZON FULLFILLMENT CENTER SAT3 is the property owner and Stantec Architecture Inc. is the design firm of record. The project was registered with TDLR on March 3, 2025.
Amazon SAT3 - OBD-A Upgrades is a renovation/alteration project at 6806 Cal Turner Drive Pittsburgh Pa 15241, San Antonio, TX 78220 in Cal Turner Drive Pittsburgh, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Update 17 manual workstations with robot arm workstations and add associated charging and maintenance area along with compressed air and vacuum piping loops, remediate floor finish where required.
Amazon SAT3 - OBD-A Upgrades is currently under construction in Cal Turner Drive Pittsburgh, TX. Its current TDLR status is "Review Complete".
Amazon SAT3 - OBD-A Upgrades is located at 6806 Cal Turner Drive Pittsburgh Pa 15241, San Antonio, TX 78220, Cal Turner Drive Pittsburgh, TX, 15241, in Bexar County.
USRE STAR LLC DBA AMAZON FULLFILLMENT CENTER SAT3 is the property owner/developer of record for Amazon SAT3 - OBD-A Upgrades, per its TDLR project registration.
Stantec Architecture Inc. is the design firm of record for Amazon SAT3 - OBD-A Upgrades, according to its TDLR filing.
Amazon SAT3 - OBD-A Upgrades has an estimated construction value of $2.0M and approximately 150,000 square feet (about $13/sqft), based on its TDLR filing.
Update 17 manual workstations with robot arm workstations and add associated charging and maintenance area along with compressed air and vacuum piping loops, remediate floor finish where required.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
Filed
Mar 3, 2025
Review Complete
Mar 3, 2025
Inspection Complete
Closed
