Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

All-Tex Welding Supply

30903 Old Washington Road, Waller, TX 77484, Waller, TX, 77484

All-Tex Welding Supply is a new construction project at 30903 Old Washington Road, Waller, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $250K across about 3,200 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025013554

$250K

Project Value

3,200

Square Feet

$78/sqft

Cost/SqFt

5 months

Duration

Registered:Mar 6, 2025

Start:May 1, 2025

Target:Oct 1, 2025

📝

Review Complete

Design review complete, construction may proceed

All-Tex Welding Supply is a New Construction project located at 30903 Old Washington Road, Waller, TX 77484 in Waller, Texas. The project has an estimated value of $250K covering 3,200 sq ft. JBJ Land Investments LLC is the property owner and RJS Architects is the design firm of record. The project was registered with TDLR on March 6, 2025.

❓Frequently Asked Questions

What is All-Tex Welding Supply?

All-Tex Welding Supply is a new construction project at 30903 Old Washington Road in Waller, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: A new 3,200 square foot metallic building. This administration building for new hires, and human resources.

Is All-Tex Welding Supply open in Waller?

All-Tex Welding Supply is currently under construction in Waller, TX. Its current TDLR status is "Review Complete".

Where is All-Tex Welding Supply located?

All-Tex Welding Supply is located at 30903 Old Washington Road, Waller, TX, 77484, in Harris County.

Who is the owner or developer of All-Tex Welding Supply?

JBJ Land Investments LLC is the property owner/developer of record for All-Tex Welding Supply, per its TDLR project registration.

Who is the architect or design firm for All-Tex Welding Supply?

RJS Architects is the design firm of record for All-Tex Welding Supply, according to its TDLR filing.

How much does All-Tex Welding Supply cost and how big is it?

All-Tex Welding Supply has an estimated construction value of $250K and approximately 3,200 square feet (about $78/sqft), based on its TDLR filing.

📋Scope of Work

A new 3,200 square foot metallic building. This administration building for new hires, and human resources.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.