The Bluffs at Blackhawk Sections 1 - 4
The Bluffs at Blackhawk Sections 1 - 4 is a new construction project at Intersection of Melber Lane and CR 198, Hutto, in Williamson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $442K across about 517,577 sq ft.
📊Project Metrics
TDLR #TABS2025013932Review Complete
Design review complete, construction may proceed
The Bluffs at Blackhawk Sections 1 - 4 is a New Construction project located at Intersection of Melber Lane and CR 198, Hutto, TX 78634 in Hutto, Texas. The project has an estimated value of $442K covering 517,577 sq ft. Tiemann Land and Cattle Development, Inc. is the property owner and ALM Engineering, Inc. F-3565 is the design firm of record. The project was registered with TDLR on March 11, 2025.
❓Frequently Asked Questions
What is The Bluffs at Blackhawk Sections 1 - 4?
The Bluffs at Blackhawk Sections 1 - 4 is a new construction project at Intersection of Melber Lane and CR 198 in Hutto, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 2,897 LF of 5' concrete sidewalk, 5,452 LF of 6' concrete sidewalk, and 76 Type 1 Ramps. Total of 51,757sf (including ramps).
Is The Bluffs at Blackhawk Sections 1 - 4 open in Hutto?
The Bluffs at Blackhawk Sections 1 - 4 is currently under construction in Hutto, TX. Its current TDLR status is "Review Complete".
Where is The Bluffs at Blackhawk Sections 1 - 4 located?
The Bluffs at Blackhawk Sections 1 - 4 is located at Intersection of Melber Lane and CR 198, Hutto, TX, 78634, in Williamson County.
Who is the owner or developer of The Bluffs at Blackhawk Sections 1 - 4?
Tiemann Land and Cattle Development, Inc. is the property owner/developer of record for The Bluffs at Blackhawk Sections 1 - 4, per its TDLR project registration.
Who is the architect or design firm for The Bluffs at Blackhawk Sections 1 - 4?
ALM Engineering, Inc. F-3565 is the design firm of record for The Bluffs at Blackhawk Sections 1 - 4, according to its TDLR filing.
How much does The Bluffs at Blackhawk Sections 1 - 4 cost and how big is it?
The Bluffs at Blackhawk Sections 1 - 4 has an estimated construction value of $442K and approximately 517,577 square feet (about $1/sqft), based on its TDLR filing.
📋Scope of Work
2,897 LF of 5' concrete sidewalk, 5,452 LF of 6' concrete sidewalk, and 76 Type 1 Ramps. Total of 51,757sf (including ramps).
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Mar 11, 2025
Review Complete
Mar 11, 2025
Inspection Complete
Closed
🔗Related Projects
🏛️Same Design Firm
$2.4M totalProperty Owner
Design Firm
Registered Accessibility Specialist
Williamson County Economy
Explore Area
Find Professionals
Need a contractor for this project?
Browse verified general contractors active in Williamson County
Find General Contractors in Williamson