Construction complete · Mar 2025🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Independence Valves

625 Howard Dr, Deer Park, TX 77536, Deer Park, TX, 77536

Independence Valves is a new construction project at 625 Howard Dr, Deer Park, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2025). The project has an estimated value of $492K across about 7,920 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2025014047

$492K

Project Value

7,920

Square Feet

$62/sqft

Cost/SqFt

7 months

Duration

Registered:Mar 12, 2025

Start:Jun 3, 2025

Target:Dec 28, 2025

🏁

Project Closed

Project has been completed and closed

Independence Valves is a New Construction project located at 625 Howard Dr, Deer Park, TX 77536 in Deer Park, Texas. The project has an estimated value of $492K covering 7,920 sq ft. Independence Valves is the property owner and Method Architecture is the design firm of record. The project was registered with TDLR on March 12, 2025.

❓Frequently Asked Questions

What is Independence Valves?

Independence Valves is a new construction project at 625 Howard Dr in Deer Park, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: One ground up, pre engineered metal building to house storage

Is Independence Valves open in Deer Park?

Construction on Independence Valves is complete — TDLR records show the project passed its required accessibility inspection in Mar 2025. The building is finished and very likely open.

Where is Independence Valves located?

Independence Valves is located at 625 Howard Dr, Deer Park, TX, 77536, in Harris County.

Who is the owner or developer of Independence Valves?

Independence Valves is the property owner/developer of record for Independence Valves, per its TDLR project registration.

Who is the architect or design firm for Independence Valves?

Method Architecture is the design firm of record for Independence Valves, according to its TDLR filing.

How much does Independence Valves cost and how big is it?

Independence Valves has an estimated construction value of $492K and approximately 7,920 square feet (about $62/sqft), based on its TDLR filing.

📋Scope of Work

One ground up, pre engineered metal building to house storage

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.