Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

UNITY MANUFACTURING

210 E. BUCKINGHAM RD., Garland, TX 75040, Garland, TX, 75040

UNITY MANUFACTURING is a renovation/alteration project at 210 E. BUCKINGHAM RD., Garland, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $500K across about 4,650 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025015375

$500K

Project Value

4,650

Square Feet

$108/sqft

Cost/SqFt

9 months

Duration

Registered:Mar 28, 2025

Start:Mar 15, 2025

Target:Dec 16, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

UNITY MANUFACTURING is a Renovation/Alteration project located at 210 E. BUCKINGHAM RD., Garland, TX 75040 in Garland, Texas. The project has an estimated value of $500K covering 4,650 sq ft. ERD HOLDINGS is the property owner and ESTUDIO RICARDO TORRES is the design firm of record. The project was registered with TDLR on March 28, 2025.

❓Frequently Asked Questions

What is UNITY MANUFACTURING?

UNITY MANUFACTURING is a renovation/alteration project at 210 E. BUCKINGHAM RD. in Garland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: 1-STORY INTERIOR FINISH-OUT

Is UNITY MANUFACTURING open in Garland?

UNITY MANUFACTURING is currently under construction in Garland, TX. Its current TDLR status is "Project Registered".

Where is UNITY MANUFACTURING located?

UNITY MANUFACTURING is located at 210 E. BUCKINGHAM RD., Garland, TX, 75040, in Dallas County.

Who is the owner or developer of UNITY MANUFACTURING?

ERD HOLDINGS is the property owner/developer of record for UNITY MANUFACTURING, per its TDLR project registration.

Who is the architect or design firm for UNITY MANUFACTURING?

ESTUDIO RICARDO TORRES is the design firm of record for UNITY MANUFACTURING, according to its TDLR filing.

How much does UNITY MANUFACTURING cost and how big is it?

UNITY MANUFACTURING has an estimated construction value of $500K and approximately 4,650 square feet (about $108/sqft), based on its TDLR filing.

📋Scope of Work

1-STORY INTERIOR FINISH-OUT

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.