Under construction📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Picco Coatings Phase III

20738 Stokes Road, Waller, TX 77484, Waller, TX, 77484

Picco Coatings Phase III is a new construction project at 20738 Stokes Road, Waller, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.6M across about 15,992 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025017233

$1.6M

Project Value

15,992

Square Feet

$97/sqft

Cost/SqFt

9 months

Duration

Registered:Apr 22, 2025

Start:Jun 1, 2025

Target:Mar 1, 2026

📝

Review Complete

Design review complete, construction may proceed

Picco Coatings Phase III is a New Construction project located at 20738 Stokes Road, Waller, TX 77484 in Waller, Texas. The project has an estimated value of $1.6M covering 15,992 sq ft. Stokes Road, LLC is the property owner and Jmerc Designs is the design firm of record. The project was registered with TDLR on April 22, 2025.

❓Frequently Asked Questions

What is Picco Coatings Phase III?

Picco Coatings Phase III is a new construction project at 20738 Stokes Road in Waller, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction- Warehouse with receiving dock and maintenance support building= 15992SF

Is Picco Coatings Phase III open in Waller?

Picco Coatings Phase III is currently under construction in Waller, TX. Its current TDLR status is "Review Complete".

Where is Picco Coatings Phase III located?

Picco Coatings Phase III is located at 20738 Stokes Road, Waller, TX, 77484, in Harris County.

Who is the owner or developer of Picco Coatings Phase III?

Stokes Road, LLC is the property owner/developer of record for Picco Coatings Phase III, per its TDLR project registration.

Who is the architect or design firm for Picco Coatings Phase III?

Jmerc Designs is the design firm of record for Picco Coatings Phase III, according to its TDLR filing.

How much does Picco Coatings Phase III cost and how big is it?

Picco Coatings Phase III has an estimated construction value of $1.6M and approximately 15,992 square feet (about $97/sqft), based on its TDLR filing.

📋Scope of Work

New construction- Warehouse with receiving dock and maintenance support building= 15992SF

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.