Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

4600 Park Springs

4600 Park Springs Blvd., Arlington, TX 76017, Arlington, TX, 76017

4600 Park Springs is a renovation/alteration project at 4600 Park Springs Blvd., Arlington, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $431K across about 5,568 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025019861

$431K

Project Value

5,568

Square Feet

$77/sqft

Cost/SqFt

2 months

Duration

Registered:May 28, 2025

Start:Jun 2, 2025

Target:Jul 31, 2025

📝

Review Complete

Design review complete, construction may proceed

4600 Park Springs is a Renovation/Alteration project located at 4600 Park Springs Blvd., Arlington, TX 76017 in Arlington, Texas. The project has an estimated value of $431K covering 5,568 sq ft. The Northern Shore, LLC is the property owner and interior design group is the design firm of record. The project was registered with TDLR on May 28, 2025.

❓Frequently Asked Questions

What is 4600 Park Springs?

4600 Park Springs is a renovation/alteration project at 4600 Park Springs Blvd. in Arlington, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: finish out of common area and white box 3 suites

Is 4600 Park Springs open in Arlington?

4600 Park Springs is currently under construction in Arlington, TX. Its current TDLR status is "Review Complete".

Where is 4600 Park Springs located?

4600 Park Springs is located at 4600 Park Springs Blvd., Arlington, TX, 76017, in Tarrant County.

Who is the owner or developer of 4600 Park Springs?

The Northern Shore, LLC is the property owner/developer of record for 4600 Park Springs, per its TDLR project registration.

Who is the architect or design firm for 4600 Park Springs?

interior design group is the design firm of record for 4600 Park Springs, according to its TDLR filing.

How much does 4600 Park Springs cost and how big is it?

4600 Park Springs has an estimated construction value of $431K and approximately 5,568 square feet (about $77/sqft), based on its TDLR filing.

📋Scope of Work

finish out of common area and white box 3 suites

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.