Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

NFCU Dallas Training Center

3300 Olympus Blvd, Dallas, TX 75019, Dallas, TX, 75019

NFCU Dallas Training Center is a renovation/alteration project at 3300 Olympus Blvd, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $1.5M across about 13,019 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025020655

$1.5M

Project Value

13,019

Square Feet

$115/sqft

Cost/SqFt

4 months

Duration

Registered:Jun 5, 2025

Start:Jul 28, 2025

Target:Nov 21, 2025

📝

Review Complete

Design review complete, construction may proceed

NFCU Dallas Training Center is a Renovation/Alteration project located at 3300 Olympus Blvd, Dallas, TX 75019 in Dallas, Texas. The project has an estimated value of $1.5M covering 13,019 sq ft. Billingsley Company is the property owner and H2 Architects, Inc is the design firm of record. The project was registered with TDLR on June 5, 2025.

❓Frequently Asked Questions

What is NFCU Dallas Training Center?

NFCU Dallas Training Center is a renovation/alteration project at 3300 Olympus Blvd in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New non-structural partitions, millwork, finishes, ceiling grid, interior glazing as relates to a banking training center. The project is first generation TI for a suite on the 5th floor of the building.

Is NFCU Dallas Training Center open in Dallas?

NFCU Dallas Training Center is currently under construction in Dallas, TX. Its current TDLR status is "Review Complete".

Where is NFCU Dallas Training Center located?

NFCU Dallas Training Center is located at 3300 Olympus Blvd, Dallas, TX, 75019, in Dallas County.

Who is the owner or developer of NFCU Dallas Training Center?

Billingsley Company is the property owner/developer of record for NFCU Dallas Training Center, per its TDLR project registration.

Who is the architect or design firm for NFCU Dallas Training Center?

H2 Architects, Inc is the design firm of record for NFCU Dallas Training Center, according to its TDLR filing.

How much does NFCU Dallas Training Center cost and how big is it?

NFCU Dallas Training Center has an estimated construction value of $1.5M and approximately 13,019 square feet (about $115/sqft), based on its TDLR filing.

📋Scope of Work

New non-structural partitions, millwork, finishes, ceiling grid, interior glazing as relates to a banking training center. The project is first generation TI for a suite on the 5th floor of the building.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.