Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Alamo Mechanical HQ

113 W Lindbergh Blvd, Universal City, TX 78202, Universal City, TX, 78202

Alamo Mechanical HQ is a renovation/alteration project at 113 W Lindbergh Blvd, Universal City, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $100K across about 1,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2025023529

$100K

Project Value

1,000

Square Feet

$100/sqft

Cost/SqFt

3 months

Duration

Registered:Jul 15, 2025

Start:Jul 14, 2025

Target:Sep 30, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Alamo Mechanical HQ is a Renovation/Alteration project located at 113 W Lindbergh Blvd, Universal City, TX 78202 in Universal City, Texas. The project has an estimated value of $100K covering 1,000 sq ft. Frederick Gleeson Properties LLC is the property owner and DS3 Architects LLC is the design firm of record. The project was registered with TDLR on July 15, 2025.

❓Frequently Asked Questions

What is Alamo Mechanical HQ?

Alamo Mechanical HQ is a renovation/alteration project at 113 W Lindbergh Blvd in Universal City, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Bring building up to commercial code per Universal City Punch List

Is Alamo Mechanical HQ open in Universal City?

Alamo Mechanical HQ is currently under construction in Universal City, TX. Its current TDLR status is "Project Registered".

Where is Alamo Mechanical HQ located?

Alamo Mechanical HQ is located at 113 W Lindbergh Blvd, Universal City, TX, 78202, in Bexar County.

Who is the owner or developer of Alamo Mechanical HQ?

Frederick Gleeson Properties LLC is the property owner/developer of record for Alamo Mechanical HQ, per its TDLR project registration.

Who is the architect or design firm for Alamo Mechanical HQ?

DS3 Architects LLC is the design firm of record for Alamo Mechanical HQ, according to its TDLR filing.

How much does Alamo Mechanical HQ cost and how big is it?

Alamo Mechanical HQ has an estimated construction value of $100K and approximately 1,000 square feet (about $100/sqft), based on its TDLR filing.

📋Scope of Work

Bring building up to commercial code per Universal City Punch List

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.