Construction complete · Mar 2026✅Inspection Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

MC Machinery

2129 W. Bardin Road, Grand Prairie, TX 75052, Grand Prairie, TX, 75052

MC Machinery is a new construction project at 2129 W. Bardin Road, Grand Prairie, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2026). The project has an estimated value of $1.2M across about 15,235 sq ft.

Final Inspection85%

📊Project Metrics

TDLR #TABS2025023727

$1.2M

Project Value

15,235

Square Feet

$79/sqft

Cost/SqFt

8 months

Duration

Registered:Jul 17, 2025

Start:Aug 18, 2025

Target:Mar 31, 2026

✅

Inspection Complete

Final inspection completed, awaiting project closure

MC Machinery is a New Construction project located at 2129 W. Bardin Road, Grand Prairie, TX 75052 in Grand Prairie, Texas. The project has an estimated value of $1.2M covering 15,235 sq ft. HAMILTON COMMERCIAL LLC is the property owner and HMS Architecture, PLLC is the design firm of record. The project was registered with TDLR on July 17, 2025.

❓Frequently Asked Questions

What is MC Machinery?

MC Machinery is a new construction project at 2129 W. Bardin Road in Grand Prairie, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: tenant improvement of an existing shell building

Is MC Machinery open in Grand Prairie?

Construction on MC Machinery is complete — TDLR records show the project passed its required accessibility inspection in Mar 2026. The building is finished and very likely open.

Where is MC Machinery located?

MC Machinery is located at 2129 W. Bardin Road, Grand Prairie, TX, 75052, in Dallas County.

Who is the owner or developer of MC Machinery?

HAMILTON COMMERCIAL LLC is the property owner/developer of record for MC Machinery, per its TDLR project registration.

Who is the architect or design firm for MC Machinery?

HMS Architecture, PLLC is the design firm of record for MC Machinery, according to its TDLR filing.

How much does MC Machinery cost and how big is it?

MC Machinery has an estimated construction value of $1.2M and approximately 15,235 square feet (about $79/sqft), based on its TDLR filing.

📋Scope of Work

tenant improvement of an existing shell building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.