Opening ~Oct 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

DFW Materials Testing Lab

1990 Sustainability Dr., Dfw Airport, TX 75261, Dfw Airport, TX, 75261

DFW Materials Testing Lab is a new construction project at 1990 Sustainability Dr., Dfw Airport, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Oct 2026. The project has an estimated value of $4.8M across about 4,200 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025024700

$4.8M

Project Value

4,200

Square Feet

$1.14K/sqft

Cost/SqFt

1 year

Duration

Registered:Jul 30, 2025

Start:Oct 1, 2025

Target:Oct 1, 2026

Remaining:61 days

📝

Review Complete

Design review complete, construction may proceed

DFW Materials Testing Lab is a New Construction project located at 1990 Sustainability Dr., Dfw Airport, TX 75261 in Dfw Airport, Texas. The project has an estimated value of $4.8M covering 4,200 sq ft. DFW Airport is the property owner and Gensler is the design firm of record. The project was registered with TDLR on July 30, 2025.

❓Frequently Asked Questions

What is DFW Materials Testing Lab?

DFW Materials Testing Lab is a new construction project at 1990 Sustainability Dr. in Dfw Airport, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New 3D printed building for material testing lab. 4,200 SQ FT.

Is DFW Materials Testing Lab open in Dfw Airport?

DFW Materials Testing Lab is still under construction in Dfw Airport, TX, with an estimated completion of Oct 2026 according to its TDLR registration.

Where is DFW Materials Testing Lab located?

DFW Materials Testing Lab is located at 1990 Sustainability Dr., Dfw Airport, TX, 75261, in Tarrant County.

Who is the owner or developer of DFW Materials Testing Lab?

DFW Airport is the property owner/developer of record for DFW Materials Testing Lab, per its TDLR project registration.

Who is the architect or design firm for DFW Materials Testing Lab?

Gensler is the design firm of record for DFW Materials Testing Lab, according to its TDLR filing.

How much does DFW Materials Testing Lab cost and how big is it?

DFW Materials Testing Lab has an estimated construction value of $4.8M and approximately 4,200 square feet (about $1.14K/sqft), based on its TDLR filing.

📋Scope of Work

New 3D printed building for material testing lab. 4,200 SQ FT.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.