Under construction📋Project Registered🏗️ New Construction💵 This project is privately funded, on private land for private use.

DCS Aviation 3 Hangars

5060 S. Collins Street, Arlington, TX 76018, Arlington, TX, 76018

DCS Aviation 3 Hangars is a new construction project at 5060 S. Collins Street, Arlington, in Tarrant County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $3.5M across about 27,600 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026001167

$3.5M

Project Value

27,600

Square Feet

$127/sqft

Cost/SqFt

4 months

Duration

Registered:Sep 17, 2025

Start:Sep 17, 2025

Target:Dec 31, 2025

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

DCS Aviation 3 Hangars is a New Construction project located at 5060 S. Collins Street, Arlington, TX 76018 in Arlington, Texas. The project has an estimated value of $3.5M covering 27,600 sq ft. City of Arlington is the property owner and Homeyer Engineering is the design firm of record. The project was registered with TDLR on September 17, 2025.

❓Frequently Asked Questions

What is DCS Aviation 3 Hangars?

DCS Aviation 3 Hangars is a new construction project at 5060 S. Collins Street in Arlington, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New construction of a 27,600 sq ft airplane storage hangar

Is DCS Aviation 3 Hangars open in Arlington?

DCS Aviation 3 Hangars is currently under construction in Arlington, TX. Its current TDLR status is "Project Registered".

Where is DCS Aviation 3 Hangars located?

DCS Aviation 3 Hangars is located at 5060 S. Collins Street, Arlington, TX, 76018, in Tarrant County.

Who is the owner or developer of DCS Aviation 3 Hangars?

City of Arlington is the property owner/developer of record for DCS Aviation 3 Hangars, per its TDLR project registration.

Who is the architect or design firm for DCS Aviation 3 Hangars?

Homeyer Engineering is the design firm of record for DCS Aviation 3 Hangars, according to its TDLR filing.

How much does DCS Aviation 3 Hangars cost and how big is it?

DCS Aviation 3 Hangars has an estimated construction value of $3.5M and approximately 27,600 square feet (about $127/sqft), based on its TDLR filing.

📋Scope of Work

New construction of a 27,600 sq ft airplane storage hangar

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.