Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Test & Assembly Rooms

4001 Flowserve Way, Pasadena, TX 77503, Pasadena, TX, 77503

Test & Assembly Rooms is a renovation/alteration project at 4001 Flowserve Way, Pasadena, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $450K across about 996 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026001228

$450K

Project Value

996

Square Feet

$452/sqft

Cost/SqFt

4 months

Duration

Registered:Sep 18, 2025

Start:Nov 3, 2025

Target:Feb 27, 2026

📝

Review Complete

Design review complete, construction may proceed

Test & Assembly Rooms is a Renovation/Alteration project located at 4001 Flowserve Way, Pasadena, TX 77503 in Pasadena, Texas. The project has an estimated value of $450K covering 996 sq ft. IDV Emerald Field LP is the property owner and PDG Architects is the design firm of record. The project was registered with TDLR on September 18, 2025.

❓Frequently Asked Questions

What is Test & Assembly Rooms?

Test & Assembly Rooms is a renovation/alteration project at 4001 Flowserve Way in Pasadena, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: alteration to existing building

Is Test & Assembly Rooms open in Pasadena?

Test & Assembly Rooms is currently under construction in Pasadena, TX. Its current TDLR status is "Review Complete".

Where is Test & Assembly Rooms located?

Test & Assembly Rooms is located at 4001 Flowserve Way, Pasadena, TX, 77503, in Harris County.

Who is the owner or developer of Test & Assembly Rooms?

IDV Emerald Field LP is the property owner/developer of record for Test & Assembly Rooms, per its TDLR project registration.

Who is the architect or design firm for Test & Assembly Rooms?

PDG Architects is the design firm of record for Test & Assembly Rooms, according to its TDLR filing.

How much does Test & Assembly Rooms cost and how big is it?

Test & Assembly Rooms has an estimated construction value of $450K and approximately 996 square feet (about $452/sqft), based on its TDLR filing.

📋Scope of Work

alteration to existing building

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.