Under construction📝Review Complete🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Katy Mills Mall Shell

5000 Katy Mills Cir. Unit 341, Katy, TX 77494, Katy, TX, 77494

Katy Mills Mall Shell is a renovation/alteration project at 5000 Katy Mills Cir. Unit 341, Katy, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $200K across about 6,220 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026003416

$200K

Project Value

6,220

Square Feet

$32/sqft

Cost/SqFt

3 months

Duration

Registered:Oct 15, 2025

Start:Oct 21, 2025

Target:Feb 1, 2026

📝

Review Complete

Design review complete, construction may proceed

Katy Mills Mall Shell is a Renovation/Alteration project located at 5000 Katy Mills Cir. Unit 341, Katy, TX 77494 in Katy, Texas. The project has an estimated value of $200K covering 6,220 sq ft. Mall at Katy Mills LP is the property owner and Fox Design Group is the design firm of record. The project was registered with TDLR on October 15, 2025.

❓Frequently Asked Questions

What is Katy Mills Mall Shell?

Katy Mills Mall Shell is a renovation/alteration project at 5000 Katy Mills Cir. Unit 341 in Katy, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: shell work to demo existing tenant spaces into one (1) space for a future tenant; while combining/capping all utilities in preparation of future tenant improvement permit/work. This permit is not seeking a certificate of occupancy.

Is Katy Mills Mall Shell open in Katy?

Katy Mills Mall Shell is currently under construction in Katy, TX. Its current TDLR status is "Review Complete".

Where is Katy Mills Mall Shell located?

Katy Mills Mall Shell is located at 5000 Katy Mills Cir. Unit 341, Katy, TX, 77494, in Harris County.

Who is the owner or developer of Katy Mills Mall Shell?

Mall at Katy Mills LP is the property owner/developer of record for Katy Mills Mall Shell, per its TDLR project registration.

Who is the architect or design firm for Katy Mills Mall Shell?

Fox Design Group is the design firm of record for Katy Mills Mall Shell, according to its TDLR filing.

How much does Katy Mills Mall Shell cost and how big is it?

Katy Mills Mall Shell has an estimated construction value of $200K and approximately 6,220 square feet (about $32/sqft), based on its TDLR filing.

📋Scope of Work

shell work to demo existing tenant spaces into one (1) space for a future tenant; while combining/capping all utilities in preparation of future tenant improvement permit/work. This permit is not seeking a certificate of occupancy.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.