Construction complete · Feb 2026🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Ryder Dallas Rack Installatoin

3701 Norwich St., Dallas, TX 75212, Dallas, TX, 75212

Ryder Dallas Rack Installatoin is a new construction project at 3701 Norwich St., Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Feb 2026). The project has an estimated value of $77K across about 7,200 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2026004571

$77K

Project Value

7,200

Square Feet

$11/sqft

Cost/SqFt

0 months

Duration

Registered:Oct 29, 2025

Start:Oct 31, 2025

Target:Nov 4, 2025

🏁

Project Closed

Project has been completed and closed

Ryder Dallas Rack Installatoin is a New Construction project located at 3701 Norwich St., Dallas, TX 75212 in Dallas, Texas. The project has an estimated value of $77K covering 7,200 sq ft. Ryder Truck Rental Inc is the property owner and EPIQ Engineering is the design firm of record. The project was registered with TDLR on October 29, 2025.

❓Frequently Asked Questions

What is Ryder Dallas Rack Installatoin?

Ryder Dallas Rack Installatoin is a new construction project at 3701 Norwich St. in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Installation of pre-engineered warehouse racking

Is Ryder Dallas Rack Installatoin open in Dallas?

Construction on Ryder Dallas Rack Installatoin is complete — TDLR records show the project passed its required accessibility inspection in Feb 2026. The building is finished and very likely open.

Where is Ryder Dallas Rack Installatoin located?

Ryder Dallas Rack Installatoin is located at 3701 Norwich St., Dallas, TX, 75212, in Dallas County.

Who is the owner or developer of Ryder Dallas Rack Installatoin?

Ryder Truck Rental Inc is the property owner/developer of record for Ryder Dallas Rack Installatoin, per its TDLR project registration.

Who is the architect or design firm for Ryder Dallas Rack Installatoin?

EPIQ Engineering is the design firm of record for Ryder Dallas Rack Installatoin, according to its TDLR filing.

How much does Ryder Dallas Rack Installatoin cost and how big is it?

Ryder Dallas Rack Installatoin has an estimated construction value of $77K and approximately 7,200 square feet (about $11/sqft), based on its TDLR filing.

📋Scope of Work

Installation of pre-engineered warehouse racking

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.