Opening ~Sep 2026📝Review Complete🏗️ New Construction💵 This project is privately funded, on private land for private use.

Mills Auto Shop

1800 S. UNIVERSITY DRIVE, Nacogdoches, TX, 75961

Mills Auto Shop is a new construction project at 1800 S. UNIVERSITY DRIVE, Nacogdoches, in Nacogdoches County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Sep 2026. The project has an estimated value of $320K across about 5,600 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2026005043

$320K

Project Value

5,600

Square Feet

$57/sqft

Cost/SqFt

10 months

Duration

Registered:Nov 4, 2025

Start:Nov 30, 2025

Target:Sep 30, 2026

Remaining:71 days

📝

Review Complete

Design review complete, construction may proceed

Mills Auto Shop is a New Construction project located at 1800 S. UNIVERSITY DRIVE in Nacogdoches, Texas. The project has an estimated value of $320K covering 5,600 sq ft. DON MILLS is the property owner and DREAM HOMES & DRAFTING is the design firm of record. The project was registered with TDLR on November 4, 2025.

❓Frequently Asked Questions

What is Mills Auto Shop?

Mills Auto Shop is a new construction project at 1800 S. UNIVERSITY DRIVE in Nacogdoches, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: SINGLE STORY PRE-ENGINEERED METAL BUILDING ON CONCRETE SLAB, SITE, PLUMBING, ELECTRICAL AND HVAC WORKS.

Is Mills Auto Shop open in Nacogdoches?

Mills Auto Shop is still under construction in Nacogdoches, TX, with an estimated completion of Sep 2026 according to its TDLR registration.

Where is Mills Auto Shop located?

Mills Auto Shop is located at 1800 S. UNIVERSITY DRIVE, Nacogdoches, TX, 75961, in Nacogdoches County.

Who is the owner or developer of Mills Auto Shop?

DON MILLS is the property owner/developer of record for Mills Auto Shop, per its TDLR project registration.

Who is the architect or design firm for Mills Auto Shop?

DREAM HOMES & DRAFTING is the design firm of record for Mills Auto Shop, according to its TDLR filing.

How much does Mills Auto Shop cost and how big is it?

Mills Auto Shop has an estimated construction value of $320K and approximately 5,600 square feet (about $57/sqft), based on its TDLR filing.

📋Scope of Work

SINGLE STORY PRE-ENGINEERED METAL BUILDING ON CONCRETE SLAB, SITE, PLUMBING, ELECTRICAL AND HVAC WORKS.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.