MATERIALS AND MOLDING R&D
MATERIALS AND MOLDING R&D is a renovation/alteration project at 13460 LOCKWOOD RD, Houston, in Harris County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Aug 2026. The project has an estimated value of $2.6M across about 3,175 sq ft.
📊Project Metrics
TDLR #TABS2026011276Review Complete
Design review complete, construction may proceed
MATERIALS AND MOLDING R&D is a Renovation/Alteration project located at 13460 LOCKWOOD RD, Houston, TX 77044 in Houston, Texas. The project has an estimated value of $2.6M covering 3,175 sq ft. TechnipFMC is the property owner and M. Arthur Gensler Jr. & Associates, Inc. is the design firm of record. The project was registered with TDLR on January 30, 2026.
❓Frequently Asked Questions
What is MATERIALS AND MOLDING R&D?
MATERIALS AND MOLDING R&D is a renovation/alteration project at 13460 LOCKWOOD RD in Houston, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: A 3,175 GSF PACKAGE FOR INTERIOR MODIFICATIONS AT AN EXISTING INDUSTRIAL BUILDING FOR A NEW LAB INTERIOR BUILDOUT AND OPEN EQUIPMENT AREA. NEW LAB INTERIOR BUILDOUT TO HAVE MEZZANINE ACCESS FOR INFRASTRUCTURE EQUIPMENT ACCESS. CURRENT CO…
Is MATERIALS AND MOLDING R&D open in Houston?
MATERIALS AND MOLDING R&D is still under construction in Houston, TX, with an estimated completion of Aug 2026 according to its TDLR registration.
Where is MATERIALS AND MOLDING R&D located?
MATERIALS AND MOLDING R&D is located at 13460 LOCKWOOD RD, Houston, TX, 77044, in Harris County.
Who is the owner or developer of MATERIALS AND MOLDING R&D?
TechnipFMC is the property owner/developer of record for MATERIALS AND MOLDING R&D, per its TDLR project registration.
Who is the architect or design firm for MATERIALS AND MOLDING R&D?
M. Arthur Gensler Jr. & Associates, Inc. is the design firm of record for MATERIALS AND MOLDING R&D, according to its TDLR filing.
How much does MATERIALS AND MOLDING R&D cost and how big is it?
MATERIALS AND MOLDING R&D has an estimated construction value of $2.6M and approximately 3,175 square feet (about $819/sqft), based on its TDLR filing.
📋Scope of Work
A 3,175 GSF PACKAGE FOR INTERIOR MODIFICATIONS AT AN EXISTING INDUSTRIAL BUILDING FOR A NEW LAB INTERIOR BUILDOUT AND OPEN EQUIPMENT AREA. NEW LAB INTERIOR BUILDOUT TO HAVE MEZZANINE ACCESS FOR INFRASTRUCTURE EQUIPMENT ACCESS. CURRENT CONSTRUCTION DO
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jan 30, 2026
Review Complete
Feb 25, 2026
Inspection Complete
Closed
26d
Review duration