Under construction📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Metro Vein

1110 COTTONWOOD LN. SUITE #270, Irving, TX 75038, Irving, TX, 75038

Metro Vein is a renovation/alteration project at 1110 COTTONWOOD LN. SUITE #270, Irving, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $280K across about 3,075 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026012348

$280K

Project Value

3,075

Square Feet

$91/sqft

Cost/SqFt

3 months

Duration

Registered:Feb 11, 2026

Start:Feb 11, 2026

Target:May 11, 2026

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Metro Vein is a Renovation/Alteration project located at 1110 COTTONWOOD LN. SUITE #270, Irving, TX 75038 in Irving, Texas. The project has an estimated value of $280K covering 3,075 sq ft. RUBICON CAPITAL INVENSTMENTS is the property owner and idGroup is the design firm of record. The project was registered with TDLR on February 11, 2026.

❓Frequently Asked Questions

What is Metro Vein?

Metro Vein is a renovation/alteration project at 1110 COTTONWOOD LN. SUITE #270 in Irving, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: THE SCOPE OF THIS PROJECT IS A NON-STRUCTURAL INTERIOR FINISH-OUT IN AN EXISTING SINGLE FLOOR SUITE. SCOPE INCLUDES HVAC, ELECTRICAL, PLUMBING.

Is Metro Vein open in Irving?

Metro Vein is currently under construction in Irving, TX. Its current TDLR status is "Project Registered".

Where is Metro Vein located?

Metro Vein is located at 1110 COTTONWOOD LN. SUITE #270, Irving, TX, 75038, in Dallas County.

Who is the owner or developer of Metro Vein?

RUBICON CAPITAL INVENSTMENTS is the property owner/developer of record for Metro Vein, per its TDLR project registration.

Who is the architect or design firm for Metro Vein?

idGroup is the design firm of record for Metro Vein, according to its TDLR filing.

How much does Metro Vein cost and how big is it?

Metro Vein has an estimated construction value of $280K and approximately 3,075 square feet (about $91/sqft), based on its TDLR filing.

📋Scope of Work

THE SCOPE OF THIS PROJECT IS A NON-STRUCTURAL INTERIOR FINISH-OUT IN AN EXISTING SINGLE FLOOR SUITE. SCOPE INCLUDES HVAC, ELECTRICAL, PLUMBING.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.