Opening ~Oct 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Flex Suite 350

6500 Pinecrest Drive Suite 350, Plano, TX 75024, Plano, TX, 75024

Flex Suite 350 is a renovation/alteration project at 6500 Pinecrest Drive Suite 350, Plano, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Oct 2026. The project has an estimated value of $220K across about 5,886 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026019378

$220K

Project Value

5,886

Square Feet

$37/sqft

Cost/SqFt

5 months

Duration

Registered:May 5, 2026

Start:Jun 1, 2026

Target:Oct 31, 2026

Remaining:128 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Flex Suite 350 is a Renovation/Alteration project located at 6500 Pinecrest Drive Suite 350, Plano, TX 75024 in Plano, Texas. The project has an estimated value of $220K covering 5,886 sq ft. B.H. 6400-6700 PINECREST DRIVE, LLC is the property owner and idGROUP is the design firm of record. The project was registered with TDLR on May 5, 2026.

❓Frequently Asked Questions

What is Flex Suite 350?

Flex Suite 350 is a renovation/alteration project at 6500 Pinecrest Drive Suite 350 in Plano, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: The scope of this project is a non-structural interior finish-out in an existing single floor suite. Scope includes HVAC, electrical, and plumbing.

Is Flex Suite 350 open in Plano?

Flex Suite 350 is still under construction in Plano, TX, with an estimated completion of Oct 2026 according to its TDLR registration.

Where is Flex Suite 350 located?

Flex Suite 350 is located at 6500 Pinecrest Drive Suite 350, Plano, TX, 75024, in Collin County.

Who is the owner or developer of Flex Suite 350?

B.H. 6400-6700 PINECREST DRIVE, LLC is the property owner/developer of record for Flex Suite 350, per its TDLR project registration.

Who is the architect or design firm for Flex Suite 350?

idGROUP is the design firm of record for Flex Suite 350, according to its TDLR filing.

How much does Flex Suite 350 cost and how big is it?

Flex Suite 350 has an estimated construction value of $220K and approximately 5,886 square feet (about $37/sqft), based on its TDLR filing.

📋Scope of Work

The scope of this project is a non-structural interior finish-out in an existing single floor suite. Scope includes HVAC, electrical, and plumbing.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.