UTSA Flawn 1.03.02B Reno
UTSA Flawn 1.03.02B Reno is a renovation/alteration project at 1 UTSA Circle, San Antonio, in Bexar County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Jun 2027. The project has an estimated value of $220K across about 585 sq ft.
📊Project Metrics
TDLR #TABS2026022200Project Registered
Project has been registered with TDLR and is in pre-construction phase
UTSA Flawn 1.03.02B Reno is a Renovation/Alteration project located at 1 UTSA Circle, San Antonio, TX 78249 in San Antonio, Texas. The project has an estimated value of $220K covering 585 sq ft. University of Texas System is the property owner and Chesney Morales Partners, Inc. is the design firm of record. The project was registered with TDLR on June 5, 2026.
❓Frequently Asked Questions
What is UTSA Flawn 1.03.02B Reno?
UTSA Flawn 1.03.02B Reno is a renovation/alteration project at 1 UTSA Circle in San Antonio, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Renovation of 585 sq ft to the Flawn Building, Level 1, existing lab 1.03.02B to include updates to flooring, casework, paint, shelving, wire mold, sinks, and relocated fume hood. The scope of work will include mechanical, electrical & p…
Is UTSA Flawn 1.03.02B Reno open in San Antonio?
UTSA Flawn 1.03.02B Reno is still under construction in San Antonio, TX, with an estimated completion of Jun 2027 according to its TDLR registration.
Where is UTSA Flawn 1.03.02B Reno located?
UTSA Flawn 1.03.02B Reno is located at 1 UTSA Circle, San Antonio, TX, 78249, in Bexar County.
Who is the owner or developer of UTSA Flawn 1.03.02B Reno?
University of Texas System is the property owner/developer of record for UTSA Flawn 1.03.02B Reno, per its TDLR project registration.
Who is the architect or design firm for UTSA Flawn 1.03.02B Reno?
Chesney Morales Partners, Inc. is the design firm of record for UTSA Flawn 1.03.02B Reno, according to its TDLR filing.
How much does UTSA Flawn 1.03.02B Reno cost and how big is it?
UTSA Flawn 1.03.02B Reno has an estimated construction value of $220K and approximately 585 square feet (about $376/sqft), based on its TDLR filing.
📋Scope of Work
Renovation of 585 sq ft to the Flawn Building, Level 1, existing lab 1.03.02B to include updates to flooring, casework, paint, shelving, wire mold, sinks, and relocated fume hood. The scope of work will include mechanical, electrical & plumbing work.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 5, 2026
Review Complete
Inspection Complete
Closed