Opening ~Dec 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Midway #3

401 S. Danville Street, Willis, TX 77378, Willis, TX, 77378

Midway #3 is a renovation/alteration project at 401 S. Danville Street, Willis, in Montgomery County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $175K across about 2,950 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026024251

$175K

Project Value

2,950

Square Feet

$59/sqft

Cost/SqFt

4 months

Duration

Registered:Jul 1, 2026

Start:Sep 1, 2026

Target:Dec 31, 2026

Remaining:180 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Midway #3 is a Renovation/Alteration project located at 401 S. Danville Street, Willis, TX 77378 in Willis, Texas. The project has an estimated value of $175K covering 2,950 sq ft. Midway Petroleum Group LP is the property owner and Doan & Associates is the design firm of record. The project was registered with TDLR on July 1, 2026.

❓Frequently Asked Questions

What is Midway #3?

Midway #3 is a renovation/alteration project at 401 S. Danville Street in Willis, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: C-store interior renovation and exterior Facade renovation

Is Midway #3 open in Willis?

Midway #3 is still under construction in Willis, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is Midway #3 located?

Midway #3 is located at 401 S. Danville Street, Willis, TX, 77378, in Montgomery County.

Who is the owner or developer of Midway #3?

Midway Petroleum Group LP is the property owner/developer of record for Midway #3, per its TDLR project registration.

Who is the architect or design firm for Midway #3?

Doan & Associates is the design firm of record for Midway #3, according to its TDLR filing.

How much does Midway #3 cost and how big is it?

Midway #3 has an estimated construction value of $175K and approximately 2,950 square feet (about $59/sqft), based on its TDLR filing.

📋Scope of Work

C-store interior renovation and exterior Facade renovation

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.