Opening ~Oct 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Unicom Engineering - Generator

🗂️ View unified construction timeline →

3501 East Plano Parkway, Plano, TX 75074, Plano, TX, 75074

Unicom Engineering - Generator is a renovation/alteration project at 3501 East Plano Parkway, Plano, in Collin County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Oct 2026. The project has an estimated value of $150K across about 83,622 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026025332

$150K

Project Value

83,622

Square Feet

$2/sqft

Cost/SqFt

3 months

Duration

Registered:Jul 15, 2026

Start:Jul 15, 2026

Target:Oct 1, 2026

Remaining:74 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Unicom Engineering - Generator is a Renovation/Alteration project located at 3501 East Plano Parkway, Plano, TX 75074 in Plano, Texas. The project has an estimated value of $150K covering 83,622 sq ft. G&I XI Plano Tech Park, LP is the property owner. The project was registered with TDLR on July 15, 2026.

❓Frequently Asked Questions

What is Unicom Engineering - Generator?

Unicom Engineering - Generator is a renovation/alteration project at 3501 East Plano Parkway in Plano, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Generator

Is Unicom Engineering - Generator open in Plano?

Unicom Engineering - Generator is still under construction in Plano, TX, with an estimated completion of Oct 2026 according to its TDLR registration.

Where is Unicom Engineering - Generator located?

Unicom Engineering - Generator is located at 3501 East Plano Parkway, Plano, TX, 75074, in Collin County.

Who is the owner or developer of Unicom Engineering - Generator?

G&I XI Plano Tech Park, LP is the property owner/developer of record for Unicom Engineering - Generator, per its TDLR project registration.

How much does Unicom Engineering - Generator cost and how big is it?

Unicom Engineering - Generator has an estimated construction value of $150K and approximately 83,622 square feet (about $2/sqft), based on its TDLR filing.

📋Scope of Work

Generator

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.