Opening ~Dec 2026📋Project Registered🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Sherwin Williams Foam House

701 S Shiloh Road, Garland, TX 75042, Garland, TX, 75042

Sherwin Williams Foam House is a renovation/alteration project at 701 S Shiloh Road, Garland, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Under construction, estimated completion Dec 2026. The project has an estimated value of $200K across about 5,000 sq ft.

Pre-Construction15%

📊Project Metrics

TDLR #TABS2026025530

$200K

Project Value

5,000

Square Feet

$40/sqft

Cost/SqFt

4 months

Duration

Registered:Jul 17, 2026

Start:Aug 31, 2026

Target:Dec 31, 2026

Remaining:154 days

📋

Project Registered

Project has been registered with TDLR and is in pre-construction phase

Sherwin Williams Foam House is a Renovation/Alteration project located at 701 S Shiloh Road, Garland, TX 75042 in Garland, Texas. The project has an estimated value of $200K covering 5,000 sq ft. VALSPAR CORPORATION is the property owner and Sector 3 Design is the design firm of record. The project was registered with TDLR on July 17, 2026.

❓Frequently Asked Questions

What is Sherwin Williams Foam House?

Sherwin Williams Foam House is a renovation/alteration project at 701 S Shiloh Road in Garland, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Tenant Finish-Out

Is Sherwin Williams Foam House open in Garland?

Sherwin Williams Foam House is still under construction in Garland, TX, with an estimated completion of Dec 2026 according to its TDLR registration.

Where is Sherwin Williams Foam House located?

Sherwin Williams Foam House is located at 701 S Shiloh Road, Garland, TX, 75042, in Dallas County.

Who is the owner or developer of Sherwin Williams Foam House?

VALSPAR CORPORATION is the property owner/developer of record for Sherwin Williams Foam House, per its TDLR project registration.

Who is the architect or design firm for Sherwin Williams Foam House?

Sector 3 Design is the design firm of record for Sherwin Williams Foam House, according to its TDLR filing.

How much does Sherwin Williams Foam House cost and how big is it?

Sherwin Williams Foam House has an estimated construction value of $200K and approximately 5,000 square feet (about $40/sqft), based on its TDLR filing.

📋Scope of Work

Tenant Finish-Out

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.