Flex Jet Hangar Offices 1 & 3
Flex Jet Hangar Offices 1 & 3 is a additions to existing building project at 7701 Lemmon Ave, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $200K across about 5,472 sq ft.
📊Project Metrics
TDLR #TABS2019005514Review Complete
Design review complete, construction may proceed
Flex Jet Hangar Offices 1 & 3 is a Additions to Existing Building project located at 7701 Lemmon Ave, Dallas, TX 75209 in Dallas, Texas. The project has an estimated value of $200K covering 5,472 sq ft. CITY OF DALLAS is the property owner and O'Brien Architects is the design firm of record. The project was registered with TDLR on February 22, 2019.
❓Frequently Asked Questions
What is Flex Jet Hangar Offices 1 & 3?
Flex Jet Hangar Offices 1 & 3 is a additions to existing building project at 7701 Lemmon Ave in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Light gauge metal framing, electrical mechanical plumbing typical to office construction
Is Flex Jet Hangar Offices 1 & 3 open in Dallas?
Flex Jet Hangar Offices 1 & 3 is currently under construction in Dallas, TX. Its current TDLR status is "Review Complete".
Where is Flex Jet Hangar Offices 1 & 3 located?
Flex Jet Hangar Offices 1 & 3 is located at 7701 Lemmon Ave, Dallas, TX, 75209, in Dallas County.
Who is the owner or developer of Flex Jet Hangar Offices 1 & 3?
CITY OF DALLAS is the property owner/developer of record for Flex Jet Hangar Offices 1 & 3, per its TDLR project registration.
Who is the architect or design firm for Flex Jet Hangar Offices 1 & 3?
O'Brien Architects is the design firm of record for Flex Jet Hangar Offices 1 & 3, according to its TDLR filing.
How much does Flex Jet Hangar Offices 1 & 3 cost and how big is it?
Flex Jet Hangar Offices 1 & 3 has an estimated construction value of $200K and approximately 5,472 square feet (about $37/sqft), based on its TDLR filing.
📋Scope of Work
Light gauge metal framing, electrical mechanical plumbing typical to office construction
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Feb 22, 2019
Review Complete
Feb 22, 2019
Inspection Complete
Closed