Construction complete · Dec 2019🏁Project Closed🏗️ New Construction💵 This project is privately funded, on private land for private use.

Culver's of Denison

5131 Gateway Bldv, Denison, TX 75020, Denison, TX, 75020

Culver's of Denison is a new construction project at 5131 Gateway Bldv, Denison, in Grayson County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2019). The project has an estimated value of $1.4M across about 4,978 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2019008598

$1.4M

Project Value

4,978

Square Feet

$271/sqft

Cost/SqFt

7 months

Duration

Registered:Apr 3, 2019

Start:Apr 24, 2019

Target:Dec 1, 2019

🏁

Project Closed

Project has been completed and closed

Culver's of Denison is a New Construction project located at 5131 Gateway Bldv, Denison, TX 75020 in Denison, Texas. The project has an estimated value of $1.4M covering 4,978 sq ft. B. Bishop Enterprises, LLC is the property owner and Ollmann Ernest Martin Architects is the design firm of record. The project was registered with TDLR on April 3, 2019.

❓Frequently Asked Questions

What is Culver's of Denison?

Culver's of Denison is a new construction project at 5131 Gateway Bldv in Denison, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: New Culver's Restaurant

Is Culver's of Denison open in Denison?

Construction on Culver's of Denison is complete — TDLR records show the project passed its required accessibility inspection in Dec 2019. The building is finished and very likely open.

Where is Culver's of Denison located?

Culver's of Denison is located at 5131 Gateway Bldv, Denison, TX, 75020, in Grayson County.

Who is the owner or developer of Culver's of Denison?

B. Bishop Enterprises, LLC is the property owner/developer of record for Culver's of Denison, per its TDLR project registration.

Who is the architect or design firm for Culver's of Denison?

Ollmann Ernest Martin Architects is the design firm of record for Culver's of Denison, according to its TDLR filing.

How much does Culver's of Denison cost and how big is it?

Culver's of Denison has an estimated construction value of $1.4M and approximately 4,978 square feet (about $271/sqft), based on its TDLR filing.

📋Scope of Work

New Culver's Restaurant

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.