Under construction📝Review Complete🔧 Additions to Existing Building💵 This project is privately funded, on private land for private use.

Danone DTX Filler

3333 Dan Morton Drive, Dallas, TX 75236, Dallas, TX, 75236

Danone DTX Filler is a additions to existing building project at 3333 Dan Morton Drive, Dallas, in Dallas County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Currently under construction. The project has an estimated value of $5.0M across about 8,483 sq ft.

Construction50%

📊Project Metrics

TDLR #TABS2025001863

$5.0M

Project Value

8,483

Square Feet

$589/sqft

Cost/SqFt

1 year

Duration

Registered:Sep 26, 2024

Start:Oct 1, 2024

Target:Oct 1, 2025

📝

Review Complete

Design review complete, construction may proceed

Danone DTX Filler is a Additions to Existing Building project located at 3333 Dan Morton Drive, Dallas, TX 75236 in Dallas, Texas. The project has an estimated value of $5.0M covering 8,483 sq ft. WWF Operating Company, DBA: Danone is the property owner and Ollmann Ernest Martin Architects is the design firm of record. The project was registered with TDLR on September 26, 2024.

❓Frequently Asked Questions

What is Danone DTX Filler?

Danone DTX Filler is a additions to existing building project at 3333 Dan Morton Drive in Dallas, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Addition of a compressor room (725 sf), addition of equipment silo tank pad (500 sf), and remodel of existing for new equipment layout (7,258 sf).

Is Danone DTX Filler open in Dallas?

Danone DTX Filler is currently under construction in Dallas, TX. Its current TDLR status is "Review Complete".

Where is Danone DTX Filler located?

Danone DTX Filler is located at 3333 Dan Morton Drive, Dallas, TX, 75236, in Dallas County.

Who is the owner or developer of Danone DTX Filler?

WWF Operating Company, DBA: Danone is the property owner/developer of record for Danone DTX Filler, per its TDLR project registration.

Who is the architect or design firm for Danone DTX Filler?

Ollmann Ernest Martin Architects is the design firm of record for Danone DTX Filler, according to its TDLR filing.

How much does Danone DTX Filler cost and how big is it?

Danone DTX Filler has an estimated construction value of $5.0M and approximately 8,483 square feet (about $589/sqft), based on its TDLR filing.

📋Scope of Work

Addition of a compressor room (725 sf), addition of equipment silo tank pad (500 sf), and remodel of existing for new equipment layout (7,258 sf).

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.