Capital Printing
Capital Printing is a additions to existing building project at 4001 Caven Road, Austin, in Travis County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Dec 2019). The project has an estimated value of $1.0M across about 10,755 sq ft.
📊Project Metrics
TDLR #TABS2019015048Project Closed
Project has been completed and closed
Capital Printing is a Additions to Existing Building project located at 4001 Caven Road, Austin, TX 78744 in Austin, Texas. The project has an estimated value of $1.0M covering 10,755 sq ft. Evan Williams is the property owner and Haddon+Cowan Architects is the design firm of record. The project was registered with TDLR on June 27, 2019.
❓Frequently Asked Questions
What is Capital Printing?
Capital Printing is a additions to existing building project at 4001 Caven Road in Austin, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: construction of a 10,755 s.f. warehouse addition with 2 single user restrooms.
Is Capital Printing open in Austin?
Construction on Capital Printing is complete — TDLR records show the project passed its required accessibility inspection in Dec 2019. The building is finished and very likely open.
Where is Capital Printing located?
Capital Printing is located at 4001 Caven Road, Austin, TX, 78744, in Travis County.
Who is the owner or developer of Capital Printing?
Evan Williams is the property owner/developer of record for Capital Printing, per its TDLR project registration.
Who is the architect or design firm for Capital Printing?
Haddon+Cowan Architects is the design firm of record for Capital Printing, according to its TDLR filing.
How much does Capital Printing cost and how big is it?
Capital Printing has an estimated construction value of $1.0M and approximately 10,755 square feet (about $93/sqft), based on its TDLR filing.
📋Scope of Work
construction of a 10,755 s.f. warehouse addition with 2 single user restrooms.
Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.
📅Compliance Timeline
📅Project Timeline
Filed
Jun 27, 2019
Review Complete
Inspection Complete
Closed
Dec 31, 2019
🔗Related Projects
📄Related City Permits
Building permits found at or near this location
Installation of a 240 sf (8 ft x 30 ft) pre-fabricated aluminum covered walkway at the Eastside campus entrance to provide weather protection from the drop-off point to the building. Scope includes laying out and placing 6 concrete footings to support structural columns. All work to be completed per engineering specifications.
Replacement of complete existing central heat and air system with or without duct work LIKE FOR LIKE: 3 ton horizontal gas system
New 1-story detached accessory structure (pool side cabana) 1 bath with stone veneer flat TPO roof wood frame on drilled concrete caissons. Cabana includes bathroom (shower + WC). Reconnect to existing underground electrical conduit previously servicing pergola. Install new 60 amp subpanel in cabana. One dedicated circuit for 1-ton ductless mini-split (230v)
Interior Alteration to approximately 4069 sq ft of existing office space.
Interior Alteration to approximately 4069 sq ft of existing office space including the Level 1 and Level 2 lobby areas [Level 1 & 2 Lobby]