Construction complete · Mar 2021🏁Project Closed🔧 Renovation/Alteration💵 This project is privately funded, on private land for private use.

Entegris Solids RM 6102

706 Houston Clinton Dr., Burnet, TX 78611, Burnet, TX, 78611

Entegris Solids RM 6102 is a renovation/alteration project at 706 Houston Clinton Dr., Burnet, in Burnet County, TX, tracked from its Texas Department of Licensing and Regulation (TDLR) registration. Construction complete (TDLR inspection passed Mar 2021). The project has an estimated value of $380K across about 1,500 sq ft.

Completed100%

📊Project Metrics

TDLR #TABS2020003962

$380K

Project Value

1,500

Square Feet

$253/sqft

Cost/SqFt

8 months

Duration

Registered:Oct 25, 2019

Start:Jul 13, 2020

Target:Mar 8, 2021

🏁

Project Closed

Project has been completed and closed

Entegris Solids RM 6102 is a Renovation/Alteration project located at 706 Houston Clinton Dr., Burnet, TX 78611 in Burnet, Texas. The project has an estimated value of $380K covering 1,500 sq ft. Entegris is the property owner and Fuse Architecture Studio is the design firm of record. The project was registered with TDLR on October 25, 2019.

❓Frequently Asked Questions

What is Entegris Solids RM 6102?

Entegris Solids RM 6102 is a renovation/alteration project at 706 Houston Clinton Dr. in Burnet, Texas, registered with the Texas Department of Licensing and Regulation (TDLR). Scope of work: Converting maintenance shop into lab room.

Is Entegris Solids RM 6102 open in Burnet?

Construction on Entegris Solids RM 6102 is complete — TDLR records show the project passed its required accessibility inspection in Mar 2021. The building is finished and very likely open.

Where is Entegris Solids RM 6102 located?

Entegris Solids RM 6102 is located at 706 Houston Clinton Dr., Burnet, TX, 78611, in Burnet County.

Who is the owner or developer of Entegris Solids RM 6102?

Entegris is the property owner/developer of record for Entegris Solids RM 6102, per its TDLR project registration.

Who is the architect or design firm for Entegris Solids RM 6102?

Fuse Architecture Studio is the design firm of record for Entegris Solids RM 6102, according to its TDLR filing.

How much does Entegris Solids RM 6102 cost and how big is it?

Entegris Solids RM 6102 has an estimated construction value of $380K and approximately 1,500 square feet (about $253/sqft), based on its TDLR filing.

📋Scope of Work

Converting maintenance shop into lab room.

Note: This project is registered under the Texas Accessibility Standards (TAS) program. TDLR registration is required for commercial and public facility construction to ensure compliance with accessibility requirements under Texas Government Code Chapter 469.